Minty-FPGA

techn1-cal·Minty-FPGA·Minty_PCB_Files/Minty.kicad_pcb

Minty-FPGA PCB layout, top view — open source FPGA board by techn1-cal

About the Minty-FPGA PCB

Minty-FPGA is an open source FPGA PCB design by techn1-cal, published on GitHub. It is a 6-layer board measuring 64 × 45.5 mm, with 115 components from 29 distinct parts.

Its main chip is the LFE5U-45F-7BG256I, from the FPGA family. Other key parts include the AMS1117-3.3, TXS0102DCU, W25Q128JVS, MT41J128M16JT-125_KTR and FT231XQ. By type, the board carries 65 capacitors, 34 resistors, 9 ICs, 4 connectors, 1 crystal and 1 fuse.

Main components on the Minty-FPGA

Minty-FPGA bill of materials (BOM)

115 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LFE5U-45F-7BG256I
U1
1
AMS1117-3.3
U2
1
TXS0102DCU
U3
1
W25Q128JVS
U5
1
MT41J128M16JT-125_KTR
U6
1
FT231XQ
U8
3
TPS74801DRC
U9, U10, U11
1
ECS-3225MVQ-1000-CN
ECS-3225MVQ-1000-CN-TR
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
MICRO_SD_CARD_DET_HIROSE_DM3AT
Micro_SD_Card_Det_Hirose_DM3AT
J2
1
Conn_02x20_Counter_Clockwise
J3
1
HDMI_C_1.4
J4
1
Fuse
F1
1
120 | 100MHz
FB1
41
100N
100n
C4, C5, C6, C7, C8, C9, C11, C12 +33
5
10U
10u
C10, C33, C38, C66, C70
1
22U
22u
C34
3
1n
C35, C67, C71
6
1u
C36, C37, C39, C40, C68, C69
1
10U
10u
C65
Show 9 more
QtyPartRefs
8
22N
22n
C73, C74, C75, C76, C77, C78, C79, C80
18
4K7
4k7
R1, R2, R3, R4, R6, R7, R8, R9 +10
1
1k
R5
4
33
R10, R11, R17, R18
2
240
R12, R33
2
5K1
5k1
R15, R16
4
2k
R19, R22, R24, R34
1
10K
10k
R27
2
470
R29, R30

Minty-FPGA design files

The KiCad project lives in the techn1-cal/Minty-FPGA repository on GitHub; these links point at the commit this page was built from.

Minty-FPGA: common questions

What microcontroller does the Minty-FPGA use?

The Minty-FPGA is built around the LFE5U-45F-7BG256I, from the FPGA family.

How big is the Minty-FPGA PCB?

The Minty-FPGA measures 64 × 45.5 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Minty-FPGA?

115 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Minty-FPGA design files?

From the techn1-cal/Minty-FPGA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Minty-FPGA design in my own project?

The repository has no license, so all rights stay with techn1-cal. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Minty-FPGA without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

Similar boards