20 open source boards using the FT231XS-R
Real designs built with the FT231XS-R, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Sstv backpack
vaugerbird
38.1 × 63.5 mm22 parts2LGPL-2.095TI MSP430/CC
Apimote
riverloopsec
83.3 × 33.4 mm80 parts4LTAPR-OHL-1.089Raspberry Pi
Cm4 motherboard
Twisted-Fields
118 × 117 mm238 parts4LNo license81ESP32
Clockcore
ansemjo
75 × 40 mm54 parts2LCERN-OHL-P-2.012KevinbotV3
meowmeowahr
156.5 × 85.4 mm152 parts4LCERN-OHL-S-2.07ESP32
ESP32-D0WD-V3-ControlStand-V0-0
RobertPHeller
34.5 × 23.1 mm166 parts2LGPL-3.03FPGA
Morphcpu
ranveerlabs
70 × 70 mm80 parts4LAGPL-3.02ESP32
Speaker pod
MostlyBuilds
86.2 × 50.2 mm93 parts2LCC-BY-SA-4.01ESP32
Skimmer-Detector-PRO
planmarks
84.2 × 49.8 mm65 parts2LNo license1PIC
BMS 02
Voltworks-Garage
96.7 × 175.6 mm614 parts4LGPL-3.00STM32
CDR2026
Soupalognon
170 × 100 mm283 parts4LMIT0Kevinbot core
Kevinbot-Robotics
156.5 × 85.4 mm152 parts4LCERN-OHL-S-2.00ESP32
Spotify led matrix
austindriggs
192 × 264 mm80 parts2LNo license0AVR/Arduino
Panel
Telekomak
110 × 121 mm79 parts2LNo license0PIC
Francisco-Câmara
FranciscoCamara
54 × 54 mm67 parts4LNo license0ESP32
Twinkling butterfly
Normansrule
83.8 × 63.3 mm60 parts2LMIT0- schematic only · 262 partsRaspberry Pi
Pcb qa
xxsahanaxx
262 partsNo license0 STM32
HANDS-EMG-BOARD
blakep7
80 × 54 mm113 parts4LNo license1PIC
Projeto2
FranciscoCamara
54 × 54 mm67 parts4LNo license0AVR/Arduino
FT MainBoard
Telekomak
110 × 75 mm62 parts2LNo license0
How designs wire the FT231XS-R
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the FT231XS-R connects to, and the resistors, capacitors and other passives placed on it.
- The DSR pin is left unconnected on 16 of 16 designs.
- The DCD pin is left unconnected on 15 of 16 designs.
- The CTS pin is left unconnected on 15 of 16 designs.
- The VCCIO pin has a capacitor to GND on 12 of 16 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCIOpin 3 | Connected to: Signal 63% · 3.3V 38% |
|
| RIpin 5 | Connected to: Not connected 88% | — |
| GNDpin 6, 16 | Connected to: GND 94% | — |
| DSRpin 7 | Connected to: Not connected 100% | — |
| DCDpin 8 | Connected to: Not connected 94% | — |
| CTSpin 9 | Connected to: Not connected 94% | — |
| USBDPpin 11 | Connected to: Signal 94% |
|
| USBDMpin 12 | Connected to: Signal 94% |
|
| 3V3OUTpin 13 | Connected to: Signal 63% · 3.3V 38% |
|
| RESETpin 14 | Connected to: Signal 75% · VCCIO 25% |
|
| VCCpin 15 | Connected to: 5V 75% · a signal 19% |
|
| CBUS0pin 18 | Connected to: Not connected 80% · a signal 20% | — |
| CBUS3pin 19 | Connected to: Not connected 73% · a signal 27% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sstv backpack by vaugerbird, Apimote by riverloopsec, Cm4 motherboard by Twisted-Fields and Clockcore by ansemjo.
The FT231XS-R in open source designs
The gallery holds 20 open source boards using the FT231XS-R from 18 GitHub repositories; a typical one measures about 84.2 × 63.5 mm and carries around 80 components.
53% use four copper layers or more, and 55% carry an open source license.
The most starred is Sstv backpack by vaugerbird.
Parts used alongside the FT231XS-R
Microcontrollers on boards using the FT231XS-R
What boards using the FT231XS-R are built for
FT231XS-R: common questions
Where can I find a FT231XS-R reference design?
Each of the 20 boards on this page is a real design using the FT231XS-R. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the FT231XS-R DSR pin connected?
The DSR pin is left unconnected on 16 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the FT231XS-R.
How is the FT231XS-R DCD pin connected?
The DCD pin is left unconnected on 15 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the FT231XS-R.
How is the FT231XS-R CTS pin connected?
The CTS pin is left unconnected on 15 of 16 designs. Counted from the KiCad layouts of 16 open source designs using the FT231XS-R.
What parts are used alongside the FT231XS-R?
The DS18B20U+T&R, USBLC6-2SC6, 450-00308, 74LVC1G126SE-7 and ADS1115IDGSR appear in the most repositories here.
Which microcontrollers do boards using the FT231XS-R use?
Most are built on ESP32 (7), PIC (3), AVR/Arduino (2) and Raspberry Pi (2).
How big is a typical board using the FT231XS-R?
The median is 84.2 × 63.5 mm, and 47% are two-layer designs.
What is the most popular open source board using the FT231XS-R?
By GitHub stars, Sstv backpack by vaugerbird, with 95 stars.
Can I simulate one of these boards using the FT231XS-R before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.