Cardradio unrouted
tend876·Card-Radio-1·tools/cardradio_unrouted.kicad_pcb
About the Cardradio unrouted PCB
Cardradio unrouted is an open source RISC-V PCB design by tend876, published on GitHub. It is a 2-layer board measuring 83.2 × 51.6 mm, with 42 components from 29 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the RDA5807M, XC6206P302MR and MCP73831T-2ACI/OT. By type, the board carries 12 resistors, 11 capacitors, 4 ICs, 4 switches, 4 inductors and 3 connectors.
It belongs with the rf & radio and power & battery designs in this gallery.
From the project
The 1986 Casio RD-10 was an 86 × 54 × 2.2 mm card with a Philips TDA7020T, a CR2016 cell and a proprietary flat earphone plug. The earphone lead was also the antenna and the power switch. CR-1 keeps that behaviour but uses modern parts:
The 1986 Casio RD-10 was an 86 × 54 × 2.2 mm card with a Philips TDA7020T, a CR2016 cell and a proprietary flat earphone plug. The earphone lead was also the antenna and the power switch. CR-1 keeps that behaviour but uses modern parts:
PCB: 2 layers, 0.4 mm, 83.2 × 51.6 mm with notches for the four screw bosses. All components are on the top side and the LiPo is taped on top of the board. JLCPCB-class rules: 0.15/0.15 mm track/space, 0.3/0.6 mm vias, GND pours on both layers, about 220 stitching vias.
Main components on the Cardradio unrouted
Cardradio unrouted bill of materials (BOM)
42 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RDA5807M | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | XC6206P302MR | SOT-23 | U3 |
| 1 | MCP73831T-2ACI/OT MCP73831-2 | SOT-23-5 | U4 |
| 1 | 32.768KHZ 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | SJ-3524-SMT | Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal | J1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | SWIO | ProgPads_1x03_P2.54mm | J3 |
| 1 | LiPo 3.7V | LiPo_Pads_2x | BT1 |
| 1 | PTS810 VOL+ | SW_SPST_PTS810 | SW1 |
| 1 | PTS810 VOL- | SW_SPST_PTS810 | SW2 |
| 1 | PTS810 SEEK< | SW_SPST_PTS810 | SW3 |
| 1 | PTS810 SEEK> | SW_SPST_PTS810 | SW4 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 1 | GREEN | LED_0603_1608Metric | D2 |
| 2 | BLM15HD182SN1D 1k8@100MHz | L_0402_1005Metric | FB1, FB2 |
| 1 | BLM18HE152SN1D 1k5@100MHz | L_0603_1608Metric | FB3 |
| 1 | 100NH 100nH | L_0402_1005Metric | L1 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C1, C2 |
| 2 | 1UF 1uF | C_0402_1005Metric | C3, C4 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100NF 100nF | C_0402_1005Metric | C5, C6, C7 |
| 1 | 10UF 10uF | C_0603_1608Metric | C8 |
| 2 | 100UF 100uF | C_1206_3216Metric | C10, C11 |
| 1 | 22PF 22pF | C_0402_1005Metric | C12 |
| 2 | 1k | R_0402_1005Metric | R1, R11 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R2, R3 |
| 4 | 4K7 4k7 | R_0402_1005Metric | R4, R7, R8, R10 |
| 3 | 1M | R_0402_1005Metric | R5, R6, R9 |
| 1 | 10K 10k | R_0402_1005Metric | R12 |
Cardradio unrouted design files
The KiCad project lives in the tend876/Card-Radio-1 repository on GitHub; these links point at the commit this page was built from.
Cardradio unrouted: common questions
What microcontroller does the Cardradio unrouted use?
The Cardradio unrouted is built around the CH32V003F4P6, from the RISC-V family.
How big is the Cardradio unrouted PCB?
The Cardradio unrouted measures 83.2 × 51.6 mm, has 2 copper layers and is 0.4 mm thick.
How many components are on the Cardradio unrouted?
42 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cardradio unrouted design files?
From the tend876/Card-Radio-1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Cardradio unrouted design in my own project?
The repository has no license, so all rights stay with tend876. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Cardradio unrouted without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in Card-Radio-1
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105