5 open source boards using the RDA5807M
Real designs built with the RDA5807M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Rda5807m receiver
dilshan
112.6 × 85.4 mm61 parts2LMIT23STM32
Fm radio
snakeye
60 × 17 mm41 parts4LNo license1ESP32
FMTransceiver
Longing-Ingernot
100 × 69.4 mm64 parts4LMIT0ESP8266
FM-Radio-Using-ESP-12E-and-RDA5807M
ItzzInfinity
47.5 × 28.3 mm9 parts2LMIT0RISC-V
Cardradio unrouted
tend876
83.2 × 51.6 mm42 parts2LNo license0
How designs wire the RDA5807M
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RDA5807M connects to, and the resistors, capacitors and other passives placed on it.
- The SCLK pin is left unconnected on 3 of 5 designs (a signal on 2).
- The SDIO pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
- The RCLK pin is tied to GND on 3 of 5 designs (a signal on 2).
- The ROUT pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 3, 8 | Connected to: GND 40% · not connected 20% · a signal 40% |
|
| FM_INpin 2 | Connected to: Signal 100% |
|
| SCLKpin 4 | Connected to: Not connected 60% · a signal 40% |
|
| SDIOpin 5 | Connected to: 3.3V 60% · a signal 40% | — |
| RCLKpin 6 | Connected to: GND 60% · a signal 40% |
|
| ROUTpin 9 | Connected to: Not connected 60% · a signal 40% |
|
| LOUTpin 10 | Connected to: A connector 40% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rda5807m receiver by dilshan, Fm radio by snakeye, FM-Radio-Using-ESP-12E-and-RDA5807M by ItzzInfinity and FMTransceiver by Longing-Ingernot.
The RDA5807M in open source designs
The gallery holds 5 open source boards using the RDA5807M from 5 GitHub repositories; a typical one measures about 83.2 × 51.6 mm and carries around 42 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Rda5807m receiver by dilshan.
Microcontrollers on boards using the RDA5807M
What boards using the RDA5807M are built for
RDA5807M: common questions
Where can I find a RDA5807M reference design?
Each of the 5 boards on this page is a real design using the RDA5807M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the RDA5807M SCLK pin connected?
The SCLK pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the RDA5807M.
How is the RDA5807M SDIO pin connected?
The SDIO pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the RDA5807M.
How is the RDA5807M RCLK pin connected?
The RCLK pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the RDA5807M.
Which microcontrollers do boards using the RDA5807M use?
Most are built on AVR/Arduino (1), ESP32 (1), ESP8266 (1) and RISC-V (1).
How big is a typical board using the RDA5807M?
The median is 83.2 × 51.6 mm, and 60% are two-layer designs.
What is the most popular open source board using the RDA5807M?
By GitHub stars, Rda5807m receiver by dilshan, with 23 stars.
Can I simulate one of these boards using the RDA5807M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.