Huracan Mk III controller

terjeio·MultimediaCenter·Electronics/Controller/controller.kicad_pcb

Huracan Mk III controller PCB layout, top view — open source board by terjeio

About the Huracan Mk III controller PCB

Huracan Mk III controller is an open source PCB design by terjeio, published on GitHub. It is a 2-layer board measuring 75 × 60 mm, with 57 components from 38 distinct parts.

Other key parts include the MIC5209, AT42QT1011, AT42QT1012, TSOP34436 and TM4C1231H6PM. By type, the board carries 21 capacitors, 17 resistors, 7 ICs, 6 connectors, 3 diodes and 1 transistor.

It belongs with the rf & radio and audio designs in this gallery.

From the project

Multimedia center with DAB/FM radio

High quality (IMO) pre-amp board with I2C control of inputs and VCA based volume control.

5 line inputs, one may be fitted with an internal RIAA-preamp (phono, for moving magnet cartridges). 2 line outputs with old-style tape copy function and post listening possible.

Power amplifier on/off switching via inbuilt relay river.

Custom Raspberry PI power switch with PC-style startup/shutdown, may be controlled over I2C or from a front panel button. Has "breakout" socket for internal USB HDD.

Main components on the Huracan Mk III controller

MIC5209 AT42QT1011 AT42QT1012 TSOP34436 TM4C1231H6PM 2.2TFT_DISPLAY_SPI LM358

Huracan Mk III controller bill of materials (BOM)

57 components, 38 distinct parts.

Qty	Part	Footprint	Refs
1	MIC5209	SOT223	U1
1	AT42QT1011	SOT23-6	U2
1	AT42QT1012	SOT23-6	U3
1	TSOP34436	Pin_Header_Straight_1x03	U4
1	TM4C1231H6PM	LQFP-64_10x10mm_Pitch0.5mm	U5
1	2.2TFT_DISPLAY_SPI	QVGA_2.2	U6
1	LM358	SO-8	U7
1	BS250	SOT-23	Q1
1	16MHz	XTAL_ABM7_6x3.5MM	X1
1	Switch 1	Pin_Header_Straight_1x01	P1
1	Switch 2	Pin_Header_Straight_1x01	P2
1	Mini_DIN_6_TE	Mini_DIN_6_TE_Connectivity	P3
1	NAVIGATOR	Pin_Header_Straight_1x04	P4
1	JTAG	Pin_Header_Straight_1x05	P5
1	CHASSIS	Socket_Strip_Straight_1x01	P6
1	RESET	SWITCH_TAC_H7.3	SW1
2	BAV99	SOT-23	D1, D2
1	Led_x2	LED-3MM-2	D3
1	47nF	C_0805	C1
1	12nF	C_0805	C2

Show 18 more

Qty	Part	Footprint	Refs
1	22uf/10V	TantalC_SizeA_EIA-3216_Reflow	C3
1	*	C_0805	C4
1	0R	C_0805	C5
7	100nF	C_0805	C6, C7, C8, C12, C16, C18, C21
3	10nF	C_0805	C9, C11, C15
2	10pF	C_0805	C10, C14
1	1uF	C_0805	C13
1	1.0uF	C_0805	C17
1	2.2uF	C_1206	C19
1	10uF/16V	TantalC_SizeA_EIA-3216_Reflow	C20
2	22K	R_1206	R1, R2
3	*	R_1206	R3, R4, R5
3	1M0	R_1206	R6, R13, R14
1	1K2	R_1206	R7
1	10K	R_1206	R8
2	1K0	R_1206	R9, R10
4	3K3	R_1206	R11, R12, R15, R16
1	4K7	R_1206	R17

Huracan Mk III controller design files

The KiCad project lives in the terjeio/MultimediaCenter repository on GitHub; these links point at the commit this page was built from.

LayoutElectronics/Controller/controller.kicad_pcb

Huracan Mk III controller: common questions

How big is the Huracan Mk III controller PCB?

The Huracan Mk III controller measures 75 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Huracan Mk III controller?

57 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the Huracan Mk III controller design files?

From the terjeio/MultimediaCenter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Huracan Mk III controller design in my own project?

The repository has no license, so all rights stay with terjeio. Use it as a reference, and ask the author before reusing the design.

More boards in MultimediaCenter

Similar boards