Huracan MkIII PreAmp Board
About the Huracan MkIII PreAmp Board
Huracan MkIII PreAmp Board is an open source TI MSP430/CC PCB design by terjeio, published on GitHub. It is a 2-layer board measuring 175 × 86 mm, with 175 components from 79 distinct parts.
Its main chip is the MSP430G2553-20, from the TI MSP430/CC family. Other key parts include the T2_L4A_8650C, SSM-2018T, OP275, DG411 and DG413. By type, the board carries 70 capacitors, 51 resistors, 26 ICs, 20 connectors, 5 diodes and 2 transistors.
It belongs with the rf & radio designs in this gallery.
From the project
Multimedia center with DAB/FM radio
The RIAA-circuitry was published by now defunct danish magazine High Fidelity way back in the 1980's. I no longer have a copy of the issue(s) related to the design so I am not sure about any related copyright but it surely is available for non-commercial use.
NOTE: Rev A has not yet been been verified as a working design.
Firmware will be released as a separate package under a different license after the design is verified.
Main components on the Huracan MkIII PreAmp Board
Huracan MkIII PreAmp Board bill of materials (BOM)
175 components, 79 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | T2_L4A_8650C | T2-L4A-8650C | IC1 |
| 2 | SSM-2018T | SOIC-16_7.5x10.3mm_Pitch1.27mm | U1, U2 |
| 9 | OP275 | DIP-8__300 | U3, U4, U5, U6, U7, U8, U9, U10 +1 |
| 1 | MSP430G2553-20 | TSSOP20 | U11 |
| 3 | DG411 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U12, U13, U15 |
| 2 | DG413 | SOIC-16_3.9x9.9mm_Pitch1.27mm | U14, U16 |
| 1 | LM7915CT | TO-220-10x15VFIN | U18 |
| 1 | LM7815CT | TO-220-10x15VFIN | U19 |
| 1 | 78L05 | TO-92_Inline_Narrow_Oval | U20 |
| 1 | MIC5209 | SOT223 | U21 |
| 1 | TC1185-1.8 | SOT-23-5 | U22 |
| 1 | MIC5268-1.2 | SOT-23-5 | U23 |
| 1 | LM358 | SO-8 | U24 |
| 1 | MCP4725 | SOT23-6 | U25 |
| 2 | BC850 | SOT-23 | Q1, Q2 |
| 1 | PWRON | PSG01538 | J1 |
| 1 | AUX | PSG01550 | P1 |
| 1 | CD | PSG01550 | P2 |
| 1 | TUNER | PSG01550 | P3 |
| 1 | TAPE1 | PSG01551 | P4 |
Show 59 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TAPE2 | PSG01551 | P5 |
| 1 | LINE OUT | PSG01550 | P6 |
| 1 | AUX/PHONO | Pin_Header_Straight_2x03 | P7 |
| 1 | LINE OUT | 70543-03 | P8 |
| 1 | 2x12VAC | CONN_PWR_3P | P9 |
| 1 | ANT | CON-SMA-EDGE | P10 |
| 1 | CHASSIS | Pin_Header_Straight_1x01 | P11 |
| 1 | AUX IN | 70543-03 | P12 |
| 1 | DAC | 70543-03 | P13 |
| 1 | RADIO | 70543-03 | P14 |
| 1 | MCU PWR | Pin_Header_Straight_1x03 | P15 |
| 1 | I2C | 70543-03 | P16 |
| 1 | DAB UART | 70543-03 | P17 |
| 1 | SBW | Pin_Header_Straight_1x03 | P18 |
| 1 | PWRON | Pin_Header_Straight_1x02 | P19 |
| 2 | 1N4007 | Diode_DO-41_SOD81_Horizontal_RM10 | D1, D2 |
| 1 | BY164 | BRIDGE_RECTIFIER_5MM | D3 |
| 1 | 1N14147 | SOD-123 | D4 |
| 1 | BAV99 | SOT-23 | D5 |
| 1 | 56nH | R_0805 | L1 |
| 7 | 100nF | C_1206 | C1, C2, C3, C17, C66, C68, C69 |
| 3 | 4.7nF | C_0805 | C4, C5, C6 |
| 3 | 68pF | C_0805 | C7, C8, C9 |
| 3 | 12pF | C_0805 | C10, C11, C12 |
| 3 | 22uF | TantalC_SizeA_EIA-3216_Reflow | C13, C14, C15 |
| 1 | 1.5nF | C_0805 | C16 |
| 2 | 10uF/16V | c_elec_3x5.3 | C18, C19 |
| 6 | 10uF/16V | C_Radial_D5_L11_P2.5 | C20, C21, C52, C55, C57, C60 |
| 2 | 47pF | C_Disc_D3_P5 | C22, C23 |
| 2 | 50pF | C_Disc_D3_P5 | C24, C70 |
| 26 | 100nF | C_Disc_D3_P5 | C25, C26, C27, C28, C29, C30, C31, C32 +18 |
| 2 | 470uF/50V | C_Radial_D10_L20_P5 | C45, C46 |
| 2 | 1000uF/50V | C_Radial_D16_L25_P7.5 | C49, C50 |
| 2 | Cx | C_Disc_D3_P5 | C51, C56 |
| 2 | 12nF | C_Disc_D3_P5 | C53, C58 |
| 2 | 2.7nF | C_Disc_D3_P5 | C54, C59 |
| 1 | 1nF | C_0805 | C65 |
| 1 | 1uF | C_1206 | C67 |
| 1 | 100K | R_0805 | R1 |
| 2 | 10K | R_0805 | R2, R4 |
| 1 | 1K | R_0805 | R3 |
| 10 | 47K | Resistor_Horizontal_RM10mm | R5, R6, R7, R8, R13, R14, R15, R16 +2 |
| 4 | 680R | Resistor_Horizontal_RM10mm | R9, R10, R11, R12 |
| 4 | 18K | Resistor_Horizontal_RM10mm | R19, R20, R23, R24 |
| 2 | 150K | Resistor_Horizontal_RM10mm | R21, R22 |
| 3 | 100R | Resistor_Horizontal_RM10mm | R25, R26, R49 |
| 4 | 5K6 | Resistor_Horizontal_RM10mm | R27, R28, R34, R35 |
| 2 | 24K | Resistor_Horizontal_RM10mm | R29, R36 |
| 2 | 270K | Resistor_Horizontal_RM10mm | R30, R37 |
| 2 | 27K | Resistor_Horizontal_RM10mm | R31, R38 |
| 2 | 1K | Resistor_Horizontal_RM10mm | R32, R39 |
| 2 | 56K | Resistor_Horizontal_RM10mm | R33, R40 |
| 1 | 3K3 | R_0805 | R41 |
| 1 | 8K2 | R_0805 | R42 |
| 1 | 68K | R_0805 | R43 |
| 4 | 6K8 | R_0805 | R44, R45, R47, R48 |
| 1 | 47K | R_0805 | R46 |
| 1 | 15K | R_0805 | R50 |
| 1 | 56K | R_0805 | R51 |
Huracan MkIII PreAmp Board design files
The KiCad project lives in the terjeio/MultimediaCenter repository on GitHub; these links point at the commit this page was built from.
Huracan MkIII PreAmp Board: common questions
What microcontroller does the Huracan MkIII PreAmp Board use?
The Huracan MkIII PreAmp Board is built around the MSP430G2553-20, from the TI MSP430/CC family.
How big is the Huracan MkIII PreAmp Board?
The Huracan MkIII PreAmp Board measures 175 × 86 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Huracan MkIII PreAmp Board?
175 components, from 79 distinct parts. The full bill of materials is listed on this page.
Where can I download the Huracan MkIII PreAmp Board design files?
From the terjeio/MultimediaCenter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Huracan MkIII PreAmp Board design in my own project?
The repository has no license, so all rights stay with terjeio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Huracan MkIII PreAmp Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.
More boards in MultimediaCenter
Similar boards
TI MSP430/CCPluto
carrotIndustries
24.4 × 24.4 mm36 parts2LGPL-3.0533
TI MSP430/CCNsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33
TI MSP430/CCElektronika-1
BenjaminSoelberg
29.5 × 29.5 mm14 parts4LGPL-3.029
TI MSP430/CCCheeseDip-Castellated
upsidedownlabs
21.6 × 60 mm27 parts2LCERN-OHL-S-2.021
TI MSP430/CCCheeseDip
21.6 × 60 mm27 parts2LCERN-OHL-S-2.021
TI MSP430/CCMSP430 Breadstick - Apple Sauce
18.5 × 65.8 mm31 parts2LCERN-OHL-S-2.021