Dasduino CONNECT
test-gh-syncer2·Soldered-Dasduino-CONNECT-hardware-design·CAD/V1.1.1/Dasduino_CONNECT.kicad_pcb
About the Dasduino CONNECT PCB
Dasduino CONNECT is an open source ESP8266 PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 25.9 × 63 mm, with 53 components from 31 distinct parts.
Its main chip is the ESP8266(ESP12-F), from the ESP8266 family. Other key parts include the CH340C, TPS7A2633DRVR and TP4056M. By type, the board carries 20 resistors, 9 capacitors, 6 diodes, 5 relays, 4 ICs and 3 transistors.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Dasduino-CONNECT designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Dasduino CONNECT
Dasduino CONNECT bill of materials (BOM)
53 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340C | SOP-16 | U1 |
| 1 | TPS7A2633DRVR | TPS7A2633DRVR | U2 |
| 1 | TP4056M | TP4056M-MSOP8 | U3 |
| 1 | ESP8266(ESP12-F) | ESP 8266(ESP12-F) | U4 |
| 1 | PMOS-SOT-23-3 | SOT-23-3 | Q1 |
| 2 | NPN-SOT-23-3 | SOT-23-3 | Q2, Q3 |
| 1 | 1206FUSE-500MA 1206FUSE-500mA | 1206FUSE | F1 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 1 | easyC-SMD | easyC-connector | K1 |
| 1 | U262-161N-4BVC11 | U262-161N-4BVC11 | K2 |
| 1 | JST-2PIN-SMD JST-2pin-SMD | JST-2pin-SMD | K3 |
| 2 | HEADER_MALE_15X1 | HEADER_MALE_15X1 | K4, K5 |
| 2 | YTSA007A0151803B | YTSA007A0151803B | SW1, SW2 |
| 1 | blue | 0402LED | D1 |
| 1 | orange | 0402LED | D2 |
| 1 | purple | 0402LED | D3 |
| 1 | WS2812B-2020 | WS2812B-2020 | D4 |
| 1 | red | 0402LED | D5 |
| 1 | BAT20J | SOD-323 | D7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1UF 0.1uF | 0603C | C1, C2 |
| 4 | 2.2UF 2.2uF | 0603C | C3, C5, C7, C8 |
| 2 | 100NF 100nF | 0603C | C4, C9 |
| 1 | 270PF 270pF | 0603C | C6 |
| 3 | 1k | 0603R | R1, R2, R5 |
| 4 | 2K2 2k2 | 0402R | R3, R4, R6, R12 |
| 2 | 5.1K 5.1k | 0603R | R7, R8 |
| 8 | 10K 10k | 0603R | R9, R10, R16, R17, R18, R19, R20, R21 |
| 1 | 3k | 0603R | R11 |
| 1 | 100K 100k | 0603R | R14 |
| 1 | 2.5K 2.5k | 0603R | R15 |
Dasduino CONNECT design files
The KiCad project lives in the test-gh-syncer2/Soldered-Dasduino-CONNECT-hardware-design repository on GitHub; these links point at the commit this page was built from.
Dasduino CONNECT: common questions
What microcontroller does the Dasduino CONNECT use?
The Dasduino CONNECT is built around the ESP8266(ESP12-F), from the ESP8266 family.
How big is the Dasduino CONNECT PCB?
The Dasduino CONNECT measures 25.9 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dasduino CONNECT?
53 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dasduino CONNECT design files?
From the test-gh-syncer2/Soldered-Dasduino-CONNECT-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dasduino CONNECT design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Can I test firmware for the Dasduino CONNECT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in Soldered-Dasduino-CONNECT-hardware-design
Similar boards
ESP8266
ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1kESP8266
HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738ESP8266
RatGDO-OpenSource-Bare-ESP8266
Kaldek
55 × 82.7 mm20 parts2LMIT506ESP8266
RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506ESP8266
Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398