Soldered-PIR-Movement sensor board hardware design
test-gh-syncer2·Soldered-PIR-Movement-sensor-board-hardware-design·CAD/V1.0.0/Pir_movement_sensor.kicad_pcb
About the Soldered-PIR-Movement sensor board hardware design
Soldered-PIR-Movement sensor board hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 34 components from 21 distinct parts.
Other key parts include the AM312, SE5218 and BISS0001. By type, the board carries 11 resistors, 9 capacitors, 3 ICs, 3 jumpers and 2 relays.
It belongs with the sensors designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for PIR-Movement-sensor-board designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-PIR-Movement sensor board hardware design
Soldered-PIR-Movement sensor board hardware design bill of materials (BOM)
34 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AM312 | PIR_senzor | U1 |
| 1 | SE5218 | SOT-23-5 | U2 |
| 1 | BISS0001 | SOP-16 | U3 |
| 2 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2 |
| 4 | — | HOLE_L1, HOLE_L2, HOLE_L3, HOLE_L4 | |
| 1 | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | SMD-JUMPER-CONNECTED_TRACE_NOSLODERMASK | JP1 |
| 1 | SMD_JUMPER | SMD_JUMPER | JP2 |
| 1 | SMD_JUMPER_3_PAD_CONNECTED_RIGHT | SMD_JUMPER_3_PAD_CONNECTED_RIGHT | JP3 |
| 1 | HEADER_MALE_2X1 | HEADER_MALE_2X1 | K1 |
| 1 | HEADER_MALE_3X1 | HEADER_MALE_3X1 | K2 |
| 2 | 2.2UF 2.2uF | 0603C | C1, C2 |
| 5 | 10N 10n | 0603C | C3, C4, C5, C6, C9 |
| 1 | 47U 47u | 0603C | C7 |
| 1 | 10UF_16V_ELEC_4MM EDK106M016A9BAA | ELECTROLITIC_CAP_4mm | C8 |
| 2 | TC33X-2-105E | tc33x-2-103e | R1, R9 |
| 2 | 1k | 0603R | R2, R3 |
| 1 | 15K 15k | 0603R | R4 |
| 2 | 47K 47k | 0603R | R5, R8 |
| 2 | 1M | 0603R | R6, R11 |
| 1 | 2M | 0603R | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 10k | 0603R | R10 |
Soldered-PIR-Movement sensor board hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-PIR-Movement-sensor-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-PIR-Movement sensor board hardware design: common questions
How big is the Soldered-PIR-Movement sensor board hardware design?
The Soldered-PIR-Movement sensor board hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-PIR-Movement sensor board hardware design?
34 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-PIR-Movement sensor board hardware design design files?
From the test-gh-syncer2/Soldered-PIR-Movement-sensor-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-PIR-Movement sensor board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956