Fandom
tfindlay-au·fandom

About the Fandom PCB
Fandom is an open source ESP32 PCB design by tfindlay-au, published on GitHub. It is a board, with 44 components from 19 distinct parts.
Its main chip is the ESP32-S2-WROVER, from the ESP32 family. Other key parts include the LM2596S-3.3, TPS25730DREFR, TMP1075DSGR, EMC2305-1-AP-TR and INA219BIDR. By type, the board carries 20 resistors, 8 capacitors, 6 ICs, 3 transistors, 1 connector and 1 diode.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
Fan Dominator
This project describes how to build a smart fan controller designed to power 4 x 140mm 12v fans (PC Case fans).
It uses USB-C input for both powering the fans and programming the ESP32 micro-controller.
The device will monitor temperature via the TMP1075DSG sensor. It will also monitor fan speed (RPM) via the EMC2305 and monitor power usage via the INA219BIDR.
Main components on the Fandom
Fandom bill of materials (BOM)
44 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S2-WROVER | MODULE_ESP32-S2-WROVER | U1 |
| 1 | LM2596S-3.3 | KTT0005B | U2 |
| 1 | TPS25730DREFR | WQFN38_REF_TEX | U3 |
| 1 | TMP1075DSGR | DSG0008A | U4 |
| 1 | EMC2305-1-AP-TR | QFN16_4x4MC_MCH | U5 |
| 1 | INA219BIDR | D0008A_N | U6 |
| 3 | AO3400A | SOT-23 | Q1, Q2, Q3 |
| 1 | USB_C_Receptacle | SWITCHCRAFT_RAHUC31AU1TR | J1 |
| 4 | 0470531000 | CONN_47053-1000_MOL | FAN1, FAN2, FAN3, FAN4 |
| 1 | D_Schottky | D1 | |
| 1 | 15uH | L1 | |
| 2 | 0.1uf | C1, C3 | |
| 4 | 10uf | C2, C4, C5, C8 | |
| 2 | 22uf | C6, C7 | |
| 11 | 10k | R1, R4, R5, R6, R7, R8, R10, R12 +3 | |
| 1 | 1.2k | R2 | |
| 1 | 2.2k | R3 | |
| 1 | 22k | R9 | |
| 6 | 4.7k | R11, R13, R14, R16, R18, R20 |
Fandom design files
The KiCad project lives in the tfindlay-au/fandom repository on GitHub; these links point at the commit this page was built from.
- SchematicFandom.kicad_sch
Fandom: common questions
What microcontroller does the Fandom use?
The Fandom is built around the ESP32-S2-WROVER, from the ESP32 family.
How many components are on the Fandom?
44 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Fandom design files?
From the tfindlay-au/fandom repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Fandom design in my own project?
The repository has no license, so all rights stay with tfindlay-au. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Fandom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k