Poc.mp3

thaimin01·Poc.mp3·pcb/Poc.mp3.kicad_pcb

Poc.mp3 PCB layout, top view — open source ESP32 board by thaimin01

About the Poc.mp3 PCB

Poc.mp3 is an open source ESP32 PCB design by thaimin01, published on GitHub. It is a 4-layer board measuring 55.2 × 102.2 mm, with 90 components from 49 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the XB6086A, TP5000X-4.2-ESOP8, SY8089AAAC, LM4871M and PCM5102A. By type, the board carries 32 capacitors, 29 resistors, 9 switches, 7 ICs, 4 connectors and 3 diodes.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

A mp3 player that fit into your pocket. With expandable micro sd storage, cool analog, digital VU meter. Finally blutooth A2DP, and an AUX output so everyone is happy. All on the esp32

-5 buttons for navigation: Up, Down, Left, Right, Select

-2 buttons for volume changing: Volume up/down

-Features and ESP32-S3 with 8MB of PSRAM and 16MB of flash (N16R8)

-Analog VU meter and two version of digital VU meter (NCS circle and Flat)

-Able to play pretty much most popular audio file with the ability to load the MP3 embeded images

-With SDMMC 1 bit can loads image and music up to 2MB/s (under ideal conditions)

Poc.mp3, from the project README
From the project README

Main components on the Poc.mp3

XB6086ATP5000X-4.2-ESOP8SY8089AAACLM4871MESP32-S3-WROOM-1PCM5102AFP6276B

Poc.mp3 bill of materials (BOM)

90 components, 49 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XB6086A
XBB608A
U1
1
TP5000X-4.2-ESOP8
U2
1
SY8089AAAC
U3
1
LM4871M
U4
1
ESP32-S3-WROOM-1
U5
1
PCM5102A
U6
1
FP6276B
U7
1
2N7002
Q1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x08_Pin
J2
1
AUDIOJACK3_SWITCHTR
AudioJack3_SwitchTR
J4
1
MICRO_SD_CARD_DET_HIROSE_DM3AT
Micro_SD_Card_Det_Hirose_DM3AT
J5
1
3.7V
BT1
1
Speaker
LS1
1
Up
SW1
1
Down
SW2
1
Left
SW3
1
Right
SW4
1
Select
SW5
1
Volume +
SW6
Show 29 more
QtyPartRefs
1
Volume -
SW7
1
Lock/unlock
SW8
1
Reset
SW9
2
1N4148W
D1, D2
1
SS34
D3
1
4.7 uH
L1
1
2.2 uH
L2
1
3.3UH
3.3uH
L3
6
0.1UF
0.1uF
C1, C16, C18, C20, C24, C28
8
10UF
10uF
C2, C3, C4, C15, C17, C19, C23, C29
2
22PF
22pF
C5, C11
6
22UF
22uF
C6, C7, C8, C9, C10, C12
3
1UF
1uF
C13, C14, C30
2
2.2UF
2.2uF
C21, C22
2
2.2NF
2.2nF
C25, C26
1
0.39UF
0.39uF
C27
2
100NF
100nF
C31, C32
3
1K
R1, R11, R12
1
0.05
R2
1
453K
R3
7
100K
100k
R4, R14, R17, R18, R27, R28, R30
1
43K
R5
1
440K
R6
1
60K
R7
2
470
R8, R9
1
20K
20k
R10
8
10K
10k
R13, R15, R16, R23, R24, R25, R26, R29
2
5.1K
5.1k
R19, R20
1
33
R31

Poc.mp3 design files

The KiCad project lives in the thaimin01/Poc.mp3 repository on GitHub; these links point at the commit this page was built from.

Poc.mp3: common questions

What microcontroller does the Poc.mp3 use?

The Poc.mp3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Poc.mp3 PCB?

The Poc.mp3 measures 55.2 × 102.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Poc.mp3?

90 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Poc.mp3 design files?

From the thaimin01/Poc.mp3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Poc.mp3 design in my own project?

The repository has no license, so all rights stay with thaimin01. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Poc.mp3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards