Enclosurefinal00
About the Enclosurefinal00 PCB
Enclosurefinal00 is an open source NXP PCB design by thenfour, published on GitHub. It is a 2-layer board measuring 59 × 69 mm, with 117 components from 70 distinct parts.
Its main chip is the PCM5102A, from the NXP family. Other key parts include the C86803, C841659, TLV75733PDBV and TLV75533PDBV. By type, the board carries 33 connectors, 33 capacitors, 32 resistors, 9 diodes, 7 ICs and 1 inductor.
It belongs with the audio and test & measurement designs in this gallery.
From the project
an electronic wind instrument / clarinet / flute / not sure
korgmicrokey37.FCStd = nothing really sketch1.FCStd = nothing really ideal.FCStd = some bell placement ideas (obsolete mostly) speakercab1.FCStd = proposed prod design of cab, with actual dimensions bommanoid00 = sketches of keyboard case design; not for prod bommanoid01 = fork of clarinoid test device 05; bringing in all bommanoid components. schematic, pcb sketches, and footprints added. not everything 100% double-checked. beginning to build pcbs out and do final checks, lets fork before i ruin my sketches. bommanoid02 = continuing design & first attempts at routing bommanoid03 = continuing…
Main components on the Enclosurefinal00
Enclosurefinal00 bill of materials (BOM)
117 components, 70 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C86803 Injoinic IP5306 battery charge | SOIC127P599X155-9N (IP5306) | IC3 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | C841659 TLV75733PDBV | SOT-23-5 | U2 |
| 1 | TLV75733PDBV | SOT-23-5 | U3 |
| 1 | PCM5102A APCI0108-P001A Teensy_4.0_MicroMod | APCI0108-P001A M.2 MicroMod 21992304 | U4 |
| 1 | TLV75533PDBV TCA9554PW | TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | TLV75733PDBV 6N138 | DIP-8_W7.62mm | U7 |
| 1 | C2718488 Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | C2718488 Conn_01x09 | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 2 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J3, J4 |
| 1 | C319148 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | XKB_U262-16XN-4BVC11 USB-C recept | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J6 |
| 10 | Conn_01x04 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J7, J8, J34, J49, J50, J51, J52, J53 +2 |
| 1 | C358721 Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 2 | Conn_01x07 | PinSocket_1x07_P2.54mm_Vertical | J10, J19 |
| 1 | Conn_01x09 | PinSocket_1x09_P2.54mm_Vertical | J13 |
| 2 | Conn_01x12 | PinSocket_1x12_P2.54mm_Vertical | J15, J16 |
| 1 | RJ45_LED_Shielded | RJ45_Amphenol_RJHSE538X | J17 |
| 1 | C2718488 Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J18 |
| 2 | Conn_01x06 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J22, J57 |
Show 50 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J23, J24 |
| 3 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J26, J54, J56 |
| 1 | USB_A | JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J32 |
| 1 | Conn_01x08 | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J33 |
| 1 | PDC54-11GWA | DIPS1524W75P254L2520H805Q18N | DS1 |
| 1 | C2915630 M.2 riser 2.5mm | Sinhoo SMTSO2530CTJ | H1 |
| 1 | 1N4148WS 3.3v | D_MiniMELF | D1 |
| 1 | 1N4148WS | D_SOD-323 | D2 |
| 1 | WS2812B korgpwr | LED_0805_2012Metric | D16 |
| 1 | WS2812B 25% | LED_0805_2012Metric | D17 |
| 1 | 50% | LED_0805_2012Metric | D18 |
| 1 | 75% | LED_0805_2012Metric | D19 |
| 1 | 100% | LED_0805_2012Metric | D20 |
| 2 | LED | LED_D5.0mm_withbottomtext | D21, D22 |
| 1 | 1UH 1uH-psa | Inductor_MCS0630-1R0MN2 | L1 |
| 2 | 10UF 10uF | C_0805_2012Metric | C1, C7 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric | C2, C10 |
| 1 | 0.1UF 2.2uF | C_0805_2012Metric | C3 |
| 2 | 2.2UF 2.2uF | C_0805_2012Metric | C4, C5 |
| 1 | 2.2UF 10uF | C_0805_2012Metric | C6 |
| 1 | 10UF 2.2uF | C_0805_2012Metric | C8 |
| 1 | 2.2UF 0.1uF | C_0805_2012Metric | C9 |
| 2 | 0.1UF 10uF | C_0805_2012Metric | C11, C13 |
| 2 | 10UF 0.1uF | C_0805_2012Metric | C12, C15 |
| 1 | 0.1UF 0.22uF | C_0805_2012Metric | C14 |
| 1 | 10UF 10uF | C_1206_3216Metric | C16 |
| 1 | 10UF 1uF | C_0805_2012Metric | C17 |
| 1 | 22UF 0.22uF | C_0805_2012Metric | C18 |
| 2 | 22UF 0.1uF | C_0805_2012Metric | C19, C25 |
| 1 | 0.22UF 0.1uF | C_1206_3216Metric | C20 |
| 3 | 22UF 22uF | C_1206_3216Metric | C21, C22, C24 |
| 6 | 0.1UF 22uF | C_1206_3216Metric | C23, C27, C28, C29, C31, C32 |
| 1 | 0.1UF 10uF | C_1206_3216Metric | C26 |
| 1 | 22uF | C_1206_3216Metric | C30 |
| 1 | 0.1uF | C_1206_3216Metric | C33 |
| 3 | 22R | R_1206_3216Metric | R1, R2, R3 |
| 2 | 470R | R_1206_3216Metric | R4, R5 |
| 1 | 220R 4.7k | R_1206_3216Metric | R6 |
| 1 | 470R 4.7k | R_1206_3216Metric | R7 |
| 1 | 47R 100k | R_1206_3216Metric | R8 |
| 1 | C22977 220R | R_1206_3216Metric | R10 |
| 1 | 10K 470R | R_1206_3216Metric | R11 |
| 1 | 0.5R 47R | R_1206_3216Metric | R12 |
| 1 | 5.1K 47R | R_1206_3216Metric | R13 |
| 1 | 5.1K 5.1k | R_1206_3216Metric | R14 |
| 1 | 5.1k | R_1206_3216Metric | R25 |
| 1 | 2R | R_1206_3216Metric | R27 |
| 1 | 10k | R_1206_3216Metric | R28 |
| 1 | 0.5R | R_1206_3216Metric | R29 |
| 15 | 220 | R_0805_2012Metric | R47, R48, R49, R50, R51, R52, R53, R54 +7 |
Enclosurefinal00 design files
The KiCad project lives in the thenfour/Clarinoid repository on GitHub; these links point at the commit this page was built from.
Enclosurefinal00: common questions
What microcontroller does the Enclosurefinal00 use?
The Enclosurefinal00 is built around the PCM5102A, from the NXP family.
How big is the Enclosurefinal00 PCB?
The Enclosurefinal00 measures 59 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Enclosurefinal00?
117 components, from 70 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Enclosurefinal00 design files?
From the thenfour/Clarinoid repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Enclosurefinal00 design in my own project?
The repository has no license, so all rights stay with thenfour. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Enclosurefinal00 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
More boards in Clarinoid
Similar boards
NXPMega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763
NXP32Bit shift register
100 × 54 mm56 parts4LNo license763
NXPWhiteFox
kiibohd
304.8 × 101.1 mm296 partsCERN-OHL-1.2415
NXPICED-L
175.4 × 145 mm163 partsCERN-OHL-1.2415
NXPICED-R
175.4 × 145 mm163 partsCERN-OHL-1.2415
NXPIC60
285 × 95 mm242 partsCERN-OHL-1.2415