HardLabs

Clarinoid devboard

thenfour·Clarinoid·CAD/clarinoid-devboard/clarinoid-devboard-05/clarinoid-devboard.kicad_pcb

Clarinoid devboard PCB layout, top view — open source NXP board by thenfour
Simulate this board

About the Clarinoid devboard PCB

Clarinoid devboard is an open source NXP PCB design by thenfour, published on GitHub. It is a 2-layer board measuring 257 × 174 mm, with 112 components from 62 distinct parts.

Its main chip is the Teensy4.1_RIGHT, from the NXP family. Other key parts include the PCA9554APW,118, C181692, CY8CMBR3108-LQXIT, PCM5102A and Teensy4.1_LEFT. By type, the board carries 32 capacitors, 26 connectors, 24 resistors, 12 ICs, 10 diodes and 6 switches.

It belongs with the audio, test & measurement and dev boards & breakouts designs in this gallery.

From the project

an electronic wind instrument / clarinet / flute / not sure

00 - 20220612 first work of a clarinoid3 test board. maybe biting off more than i can chew though. 01 - 20220612 let's break up that board into multiple sections 20220618 after some work, this thing is pretty much the MEGA tester with tons of stuff. while that's nice work and nice thought, i think it's too risky for 1st try. let's simplify then come back to this. 02 - 20220618 - let's simplify back? eh, problem is i actually want to test all that stuff in 1 go. let's just make sub-boards. 03 - 20220618 copied from 01. let's just separate certain modules into sub-modules 04 - LED drivers are…

Main components on the Clarinoid devboard

PCA9554APW,118C181692CY8CMBR3108-LQXITPCM5102ATeensy4.1_RIGHTTeensy4.1_LEFTTLV75733PDBV6N138WS2812C841659C91322

Clarinoid devboard bill of materials (BOM)

112 components, 62 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCA9554APW,118
IC1
1
C181692
Injoinic IP5306 battery charge
IC2
1
CY8CMBR3108-LQXIT
IC3
1
PCM5102A
U1
1
CONN_01X20
Teensy4.1_RIGHT
U2
1
CONN_01X20
Teensy4.1_LEFT
U3
2
TLV75733PDBV
U7, U19
1
6N138
U8
1
WS2812
U38
1
C841659
APCI0108-P001A Teensy_4.0_MicroMod
U40
1
C91322
MPR121, 0x5A
U45
1
C319148
XKB_U262-16XN-4BVC11 USB-C recept
J2
1
header_i2c
J5
4
C358720
female 1x6
J6, J45, J52, J53
1
female 1x4
J8
1
C492405
captouch 3x3x1 headerA
J9
1
SSD1306
J12
1
C492405
captouch 3x3x1 header B
J13
1
C492405
captouch4x4x2 headerA
J14
1
C492405
captouch4x4x2 header B
J15
Show 42 more
QtyPartRefs
1
C492405
captouch4x4x3 headerA
J17
1
C492405
captouch4x4x3 header B
J18
1
C492405
captouch4x4x.5 headerA
J19
1
C492405
captouch4x4x.5 header B
J21
1
C492405
captouch5x5x1 headerA
J24
1
C492405
captouch5x5x1 header B
J25
1
C492405
captouch4x4x1 headerA
J26
1
C492405
captouch4x4x1 header B
J27
1
4p
J31
2
C49661
header_power tap
J32, J33
1
C111196
microSD SOFNG TF-15x15
J38
1
CONN_01X20
Conn_01x20
J43
1
CONN_01X08
Conn_01x08
J44
1
C2915630
M.2 riser 2.5mm
H4
2
SW_Push
SW1, SW6
4
SW_Push
SW2, SW3, SW4, SW5
1
25%
D1
1
50%
D2
1
75%
D3
1
100%
D4
2
C72041
blue
D5, D7
1
1N4148WS
D6
2
C72043
green
D8, D9
1
3.3V
3.3v
D12
1
1UH
1uH
L1
7
10UF
10uF
C1, C3, C5, C10, C11, C15, C16
2
0.22UF
0.22uF
C2, C30
12
0.1UF
0.1uF
C4, C6, C13, C14, C23, C24, C25, C26 +4
4
2.2UF
2.2uF
C7, C8, C9, C12
6
22UF
22uF
C17, C18, C19, C20, C21, C22
1
1UF
1uF
C29
3
22R
R1, R2, R3
2
10K
10k
R4, R10
7
470R
R5, R6, R22, R34, R35, R36, R37
2
5.1K
5.1k
R7, R8
1
C17942
2R
R9
1
0.5R
R11
1
75K
75k
R12
2
100K
100k
R14, R15
1
220R
R19
2
47R
R20, R21
2
4.7K
4.7k
R40, R41

Clarinoid devboard design files

The KiCad project lives in the thenfour/Clarinoid repository on GitHub; these links point at the commit this page was built from.

Clarinoid devboard: common questions

What microcontroller does the Clarinoid devboard use?

The Clarinoid devboard is built around the Teensy4.1_RIGHT, from the NXP family.

How big is the Clarinoid devboard PCB?

The Clarinoid devboard measures 257 × 174 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Clarinoid devboard?

112 components, from 62 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Clarinoid devboard design files?

From the thenfour/Clarinoid repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Clarinoid devboard design in my own project?

The repository has no license, so all rights stay with thenfour. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Clarinoid devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in Clarinoid

Similar boards