PCBMERGE
theostrichjouster-star·PCBMERGE·examples/basic/SparkFun_Thing_Plus_ESP32-S3.kicad_pcb
About the PCBMERGE PCB
PCBMERGE is an open source ESP32 PCB design by theostrichjouster-star, published on GitHub under the MIT license. It is a 4-layer board measuring 22.9 × 58.4 mm, with 60 components from 36 distinct parts.
Its main chip is the ESP32-S3-MINI, from the ESP32 family. Other key parts include the RT9080-3.3, DT1042-04SO, MAX17048, MCP73831 and ThingPlus. By type, the board carries 18 resistors, 14 capacitors, 8 ICs, 6 diodes, 4 connectors and 3 jumpers.
From the project
Combine several PCB designs into one schematic and one board. Reads EAGLE and KiCad, writes EAGLE.
Two boards, one drawn in each tool, so the merge can be tried against real hardware rather than something written to suit it.
These are not ours and the project's MIT licence does not cover them. Both vendors publish their hardware as open source, Adafruit under CC BY-SA and SparkFun under CC BY-SA 4.0 at the time of writing. Check the terms in the repositories above before reusing either design. Anything the tool writes out of them carries their terms with it, not this project's.
Main components on the PCBMERGE
PCBMERGE bill of materials (BOM)
60 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RT9080-3.3 | SOT23-5 | U1, U6 |
| 1 | DT1042-04SO | SOT23-6 | U2 |
| 1 | ESP32-S3-MINI | ESP32-MINI | U3 |
| 1 | MAX17048 | DFN-8 | U4 |
| 1 | MCP73831 | SOT23-5 | U5 |
| 1 | ~ | Ordering_Instructions | U9 |
| 1 | ThingPlus | ThingPlus | U10 |
| 1 | USB_C_Receptacle | USB-C_16 | J1 |
| 1 | microSD_Friction | microSD_Friction_Fit_Common | J2 |
| 1 | JST_2mm_LiPo | JST_SMD_2.0mm-2 | J3 |
| 1 | Qwiic_RA | JST_SMD_1.0mm-4_RA | J4 |
| 1 | OSHW_Logo | Creative_Commons_License | G3 |
| 3 | ~ | Jumper_2_NC_Trace | JP1, JP2, JP3 |
| 2 | Standoff | Standoff | ST1, ST3 |
| 2 | SMD_4.6x2.8mm_h2.5mm | Push_SMD_4.6x2.8mm_h2.5mm | SW1, SW2 |
| 2 | 1.0mm | TestPoint-1.0mm | TP1, TP2 |
| 1 | Green | LED_0603_1608Metric_Green | D1 |
| 2 | BAT60A | SOD-323 | D2, D3 |
| 1 | Yellow | LED_0603_1608Metric_Yellow | D4 |
| 1 | Red | LED_0603_1608Metric_Red | D5 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WS2812B | WS2812_2020 | D6 |
| 1 | 22uF | C_0603_1608Metric | C1 |
| 4 | 0.1uF | C_0402_1005Metric | C2, C5, C8, C11 |
| 2 | 10uF | C_0402_1005Metric | C3, C4 |
| 2 | 1.0uF | C_0402_1005Metric | C6, C13 |
| 2 | 4.7uF | C_0402_1005Metric | C7, C12 |
| 1 | 4.7uF | C_0603_1608Metric | C9 |
| 2 | 2.2uF | C_0402_1005Metric | C10, C14 |
| 8 | 10k | R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R8, R17 |
| 1 | 330 | R_0402_1005Metric | R7 |
| 1 | 4.7k | R_0402_1005Metric | R9 |
| 2 | 5.1k | R_0402_1005Metric | R10, R11 |
| 2 | 2.2k | R_0402_1005Metric | R12, R15 |
| 2 | 100k | R_0402_1005Metric | R13, R19 |
| 1 | 1k | R_0402_1005Metric | R14 |
| 1 | 2.0k | R_0402_1005Metric | R16 |
PCBMERGE design files
The KiCad project lives in the theostrichjouster-star/PCBMERGE repository on GitHub; these links point at the commit this page was built from.
PCBMERGE: common questions
What microcontroller does the PCBMERGE use?
The PCBMERGE is built around the ESP32-S3-MINI, from the ESP32 family.
How big is the PCBMERGE PCB?
The PCBMERGE measures 22.9 × 58.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PCBMERGE?
60 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCBMERGE design files?
From the theostrichjouster-star/PCBMERGE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCBMERGE design in my own project?
Yes, under the terms of its MIT license, which theostrichjouster-star chose for the repository.
Can I test firmware for the PCBMERGE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k