Fristracker

TherealONE12·FrisTracker·fristracker/fristracker.kicad_pcb

Fristracker PCB layout, top view — open source RP2040/RP2350 board by TherealONE12

About the Fristracker PCB

Fristracker is an open source RP2040/RP2350 PCB design by TherealONE12, published on GitHub. It is a 2-layer board measuring 62.8 × 72.4 mm, with 15 components from 13 distinct parts.

Its main chip is the ESP32-PICO-V3-02, from the RP2040/RP2350 family. Other key parts include the NEO-6M, CH340E, TLV75733PDRV and nRF24L01+PA+LNA. By type, the board carries 5 ICs, 4 capacitors, 2 connectors, 2 resistors, 1 battery holder and 1 switch.

It belongs with the rf & radio and usb & debug tools designs in this gallery.

From the project

A tracker for your frisbee Games

A GPS tracking device embedded in an Frisbee disc to capture real-time movement data during games.

FrisTracker records GPS coordinates during a frisbee game and wirelessly transmits them to a laptop in real-time. The data can show throwing patterns, strategies, and field coverage throughout a match.

At my Youth club, we are obsesssed with Ultimate Frisbee. However, as we have lost last years anual Cup to another youth club, we were all devestad. So, I Build FrisTracker! It can help us to Analyze our Training games, and spot weaknesses in our Defense (Or more importantly, weaknesses in our…

Fristracker, from the project README
From the project README

Main components on the Fristracker

Fristracker bill of materials (BOM)

15 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-PICO-V3-02
U1
1
NEO-6M
U2
1
CH340E
U3
1
TLV75733PDRV
U4
1
nRF24L01+PA+LNA
NRF24L01+PA+LNA
null
U5
1
SMA_Edge_SMD
J1
1
Conn_USB_A_Plain
P1
1
BATTERY-HOLDER_COIN-CELL_CR2032_LINX_BAT-HLD-001
Battery-Holder_Coin-Cell_CR2032_Linx_BAT-HLD-001
BT1
1
Switch_Tactile_Omron
SW1
1
1UF
1uF
C1
2
1UF
1uF
C2, C4
1
100UF
100uF
C3
2
10K
10k
R1, R2

Fristracker design files

The KiCad project lives in the TherealONE12/FrisTracker repository on GitHub; these links point at the commit this page was built from.

Fristracker: common questions

What microcontroller does the Fristracker use?

The Fristracker is built around the ESP32-PICO-V3-02, from the RP2040/RP2350 family.

How big is the Fristracker PCB?

The Fristracker measures 62.8 × 72.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fristracker?

15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fristracker design files?

From the TherealONE12/FrisTracker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fristracker design in my own project?

The repository has no license, so all rights stay with TherealONE12. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fristracker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in FrisTracker

Similar boards