10 open source boards using the TLV75733PDRV

Real designs built with the TLV75733PDRV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TLV75733PDRV

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TLV75733PDRV connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_2 pin is left unconnected on 8 of 8 designs.
  • The NC_5 pin is left unconnected on 8 of 8 designs.
  • The OUT_1 pin is tied to 3.3V on 7 of 8 designs.
  • The IN_6 pin is tied to 5V on 7 of 8 designs.
OUT_1pin 1Connected to: 3.3V 88%
NC_2pin 2Connected to: Not connected 100%
GND_3pin 3Connected to: GND 100%
NC_5pin 5Connected to: Not connected 100%
IN_6pin 6Connected to: 5V 88%
GND_7pin 7Connected to: GND 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32 S3 CAM by HexSense-MIT, Smart-Meter by hupfer21, Chiquito by devcexx and VCU CM5 by NTURacingTeam.

The TLV75733PDRV in open source designs

The gallery holds 10 open source boards using the TLV75733PDRV from 8 GitHub repositories; a typical one measures about 62.8 × 72.4 mm and carries around 76 components.

56% use four copper layers or more, and 0% carry an open source license.

The most starred is Smart-Meter by hupfer21.

Microcontrollers on boards using the TLV75733PDRV

TLV75733PDRV: common questions

Where can I find a TLV75733PDRV reference design?

Each of the 10 boards on this page is a real design using the TLV75733PDRV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75733PDRV NC_2 pin connected?

The NC_2 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TLV75733PDRV.

How is the TLV75733PDRV NC_5 pin connected?

The NC_5 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TLV75733PDRV.

How is the TLV75733PDRV OUT_1 pin connected?

The OUT_1 pin is tied to 3.3V on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the TLV75733PDRV.

Which microcontrollers do boards using the TLV75733PDRV use?

Most are built on STM32 (4), ESP32 (3), RP2040/RP2350 (2) and FPGA (1).

How big is a typical board using the TLV75733PDRV?

The median is 62.8 × 72.4 mm, and 44% are two-layer designs.

What is the most popular open source board using the TLV75733PDRV?

By GitHub stars, Smart-Meter by hupfer21, with 1 stars.

Can I simulate one of these boards using the TLV75733PDRV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part