7 open source boards using the ESP32-PICO-V3-02
Real designs built with the ESP32-PICO-V3-02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Main
SonDinh23
30 × 40 mm116 parts4LGPL-3.00RP2040/RP2350
JamRF
Arcioth
120 × 90 mm61 parts4LCERN-OHL-P-2.00RP2040/RP2350
Fristracker
TherealONE12
62.8 × 72.4 mm15 parts2LNo license0RP2040/RP2350
Railway can
nibble-arts
30 × 30 mm3 parts2LNo license0RP2040/RP2350
MyoBand Main
SonDinh23
25 × 39 mm92 parts4LGPL-3.04RP2040/RP2350
Speek rx
JBlitzar
80 × 60 mm51 parts2LGPL-3.01RP2040/RP2350
Fristracker RCF
TherealONE12
15.5 × 98 mm12 parts2LNo license0
The ESP32-PICO-V3-02 in open source designs
The gallery holds 7 open source boards using the ESP32-PICO-V3-02 from 6 GitHub repositories; a typical one measures about 30 × 60 mm and carries around 51 components.
57% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is MyoBand Main by SonDinh23.
Parts used alongside the ESP32-PICO-V3-02
Microcontrollers on boards using the ESP32-PICO-V3-02
What boards using the ESP32-PICO-V3-02 are built for
ESP32-PICO-V3-02: common questions
Where can I find a ESP32-PICO-V3-02 reference design?
Each of the 7 boards on this page is a real design using the ESP32-PICO-V3-02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ESP32-PICO-V3-02?
The CP2102N-Axx-xQFN28, LSM6DSL, TP4056 and XC6220B331MR appear in the most repositories here.
Which microcontrollers do boards using the ESP32-PICO-V3-02 use?
Most are built on RP2040/RP2350 (7).
How big is a typical board using the ESP32-PICO-V3-02?
The median is 30 × 60 mm, and 57% are two-layer designs.
What is the most popular open source board using the ESP32-PICO-V3-02?
By GitHub stars, MyoBand Main by SonDinh23, with 4 stars.
Can I simulate one of these boards using the ESP32-PICO-V3-02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.