Espservo

ThertyOne·bird-feeder·hardware/esp servo/espservo/espservo.kicad_pcb

Espservo PCB layout, top view — open source ESP32 board by ThertyOne

About the Espservo PCB

Espservo is an open source ESP32 PCB design by ThertyOne, published on GitHub. It is a 2-layer board measuring 52.1 × 50.9 mm, with 16 components from 14 distinct parts.

Its main chip is the ESP32-CAM, from the ESP32 family. By type, the board carries 6 resistors, 4 connectors, 3 capacitors, 2 transistors and 1 IC.

It belongs with the iot & wireless and power & battery designs in this gallery.

From the project

Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.

Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.

Ładowanie z panelu odbywa się przez diodę SS34 i polyfuse 500 mA, a napięcie akumulatora jest monitorowane przez dzielnik rezystorowy podłączony do ADC ESP.

Main components on the Espservo

Espservo bill of materials (BOM)

16 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-CAM
U2
2
IRLML2502TRPBF
Q1, Q2
1
DS1023-1*4S21
servo
J5
1
DS1023-1*4S21
5V_DC/DC
J6
1
DS1023-1*4S21
ultrasonic
J8
1
DS1023-1*4S21
UART
J9
1
10 μ
C4
1
100 μ
C5
1
1 μ
C13
2
100 k
R7, R10
1
100
R8
1
100
R9
1
10 k
R11
1
20 k
R12

Espservo design files

The KiCad project lives in the ThertyOne/bird-feeder repository on GitHub; these links point at the commit this page was built from.

Espservo: common questions

What microcontroller does the Espservo use?

The Espservo is built around the ESP32-CAM, from the ESP32 family.

How big is the Espservo PCB?

The Espservo measures 52.1 × 50.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Espservo?

16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Espservo design files?

From the ThertyOne/bird-feeder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Espservo design in my own project?

The repository has no license, so all rights stay with ThertyOne. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Espservo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in bird-feeder

Similar boards