Przetwora v2
ThertyOne·bird-feeder·przetwora/przetwora_v2.kicad_pcb
About the Przetwora v2 PCB
Przetwora v2 is an open source PCB design by ThertyOne, published on GitHub. It is a 2-layer board measuring 73 × 66 mm, with 32 components from 24 distinct parts.
Other key parts include the LMC555CN/NOPB, LM393P and TL431D. By type, the board carries 14 resistors, 5 capacitors, 4 diodes, 3 ICs, 2 transistors and 2 connectors.
It belongs with the power & battery designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.
Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.
Ładowanie z panelu odbywa się przez diodę SS34 i polyfuse 500 mA, a napięcie akumulatora jest monitorowane przez dzielnik rezystorowy podłączony do ADC ESP.
Main components on the Przetwora v2
Przetwora v2 bill of materials (BOM)
32 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMC555CN/NOPB lmc555 | LMC555 | IC1 |
| 1 | LM393P | LM393 | U1 |
| 1 | TL431D | TO-92L_Inline_Wide | U2 |
| 1 | IRF740 | irf740_TO220BV | Q2 |
| 1 | NPN | 2N2222_TO127P580H530-3 | Q4 |
| 1 | 5V_step_up | roaster_3_5 | J5 |
| 1 | baterry | roaster_3_5 | J8 |
| 1 | 10k | Potentiometer_Omeg_PC16BU_Horizontal | RV1 |
| 1 | 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D5, D6 |
| 1 | 5.1 V | D_1206_3216Metric | D9 |
| 1 | ETQP4M150KFN | cewka_DE1207 | L2 |
| 2 | 10n | C_0805_2012Metric | C1, C8 |
| 2 | 100n | C_0805_2012Metric | C2, C3 |
| 1 | 100n | LED_D3.0mm | C10 |
| 1 | 680 | R_0805_2012Metric | R1 |
| 5 | 10k | R_0805_2012Metric | R2, R3, R4, R15, R20 |
| 2 | 100 | R_0805_2012Metric | R5, R10 |
| 1 | load test | R_0805_2012Metric | R6 |
| 1 | 6.8 | R_0805_2012Metric | R7 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7k | R_0805_2012Metric | R8 |
| 1 | 1k | R_0805_2012Metric | R9 |
| 1 | 470 | R_0805_2012Metric | R16 |
| 1 | 470k | R_0805_2012Metric | R21 |
Przetwora v2 design files
The KiCad project lives in the ThertyOne/bird-feeder repository on GitHub; these links point at the commit this page was built from.
Przetwora v2: common questions
How big is the Przetwora v2 PCB?
The Przetwora v2 measures 73 × 66 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Przetwora v2?
32 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Przetwora v2 design files?
From the ThertyOne/bird-feeder repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Przetwora v2 design in my own project?
The repository has no license, so all rights stay with ThertyOne. Use it as a reference, and ask the author before reusing the design.
More boards in bird-feeder
Earlier revisions in the repo: przetwora
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k