Hardware
ThertyOne·bird-feeder·hardware/hardware.kicad_pcb
About the Hardware PCB
Hardware is an open source PCB design by ThertyOne, published on GitHub. It is a 2-layer board measuring 58.5 × 50.5 mm, with 22 components from 18 distinct parts.
Other key parts include the LMC555CN/NOPB and TP4056. By type, the board carries 4 connectors, 4 diodes, 4 capacitors, 4 resistors, 2 ICs and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.
Z wyjścia baterii energia trafia do przetwornicy boost 5 V, zbudowanej od podstaw na bazie generatora PWM LMC555 i MOSFETa IRLML6344, która zasila ESP32 i peryferia – serwo sterujące karmnikiem, LEDy oświetleniowe oraz czujniki. Masa wszystkich modułów jest wspólna.
Ładowanie z panelu odbywa się przez diodę SS34 i polyfuse 500 mA, a napięcie akumulatora jest monitorowane przez dzielnik rezystorowy podłączony do ADC ESP.
Main components on the Hardware
Hardware bill of materials (BOM)
22 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMC555CN/NOPB NE555 | LMC555_DIP794W53P254L959H508Q8N | IC1 |
| 1 | TP4056 | TP4056 | U4 |
| 1 | IRF740 | IRF740 | Q4 |
| 2 | Solar panel | ARK raster 2,54 mm | J15, J16 |
| 1 | Li-Po battery | ARK raster 2,54 mm | J17 |
| 1 | Screw_Terminal_01x02 | ARK raster 2,54 mm | J18 |
| 1 | 1SMB5918BT3G | zenner_DIOM5436X247N | Z1 |
| 1 | LS R976 5 V | LEDC2012X40N | LED1 |
| 2 | SS34 | D_DO-41_SOD81_P10.16mm_Horizontal | D4, D5 |
| 1 | 1N5818 | D_DO-41_SOD81_P10.16mm_Horizontal | D6 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D8 |
| 1 | ETQP4M150KFN | DE1207 | L2 |
| 1 | EEUFC0J222 4700 μ | electrolytic_CAPPRD500W65D1000H2700 | C8 |
| 2 | 1 n | C_0603_1608Metric | C9, C12 |
| 1 | 10 μ | CAPRB250W50L400T250H550 | C14 |
| 2 | 470 | R_0603_1608Metric | R15, R16 |
| 1 | 15 k | R_0603_1608Metric | R17 |
| 1 | 1 k | R_0603_1608Metric | R18 |
Hardware design files
The KiCad project lives in the ThertyOne/bird-feeder repository on GitHub; these links point at the commit this page was built from.
Hardware: common questions
How big is the Hardware PCB?
The Hardware measures 58.5 × 50.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hardware?
22 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hardware design files?
From the ThertyOne/bird-feeder repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hardware design in my own project?
The repository has no license, so all rights stay with ThertyOne. Use it as a reference, and ask the author before reusing the design.
More boards in bird-feeder
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k