HardLabs

HyperNet-2-DAC

TheStaticTurtle·HyperNet·src/electrical/v2/DAC/HyperNet-2-DAC.kicad_pcb

HyperNet-2-DAC PCB layout, top view — open source board by TheStaticTurtle

About the HyperNet-2-DAC PCB

HyperNet-2-DAC is an open source PCB design by TheStaticTurtle, published on GitHub under the MIT license. It is a 2-layer board measuring 53 × 60.6 mm, with 56 components from 18 distinct parts.

Other key parts include the AMS1117-3.3, PCM5100A and NE5532. By type, the board carries 25 capacitors, 22 resistors, 4 ICs, 3 connectors, 1 LED and 1 inductor.

It belongs with the audio designs in this gallery.

From the project

HyperNet is an 8-in, 8-out open-source audio stagebox based on Ultranet

HyperNet is an 8-in, 8-out open-source audio stagebox designed for enthusiasts who want to transmit high-quality multi-channel audio over CAT-5 or fiber-optic networks. The protocol is based on Berhringer UltraNet.

The full story of this project is available here: - https://blog.thestaticturtle.fr/ultranet-adventures-part-1/ - https://blog.thestaticturtle.fr/ultranet-adventures-part-2/

HyperNet-2-DAC, from the project README
From the project README

Main components on the HyperNet-2-DAC

AMS1117-3.3PCM5100ANE5532

HyperNet-2-DAC bill of materials (BOM)

56 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
PCM5100A
U2
2
NE5532
U3, U5
2
NC3MAAH-1
J1, J2
1
CONN_02X08_ODD_EVEN
Conn_02x08_Odd_Even
J3
1
LED_0805_RED
LED_0805_Red
LED2
1
MI0603K300R-10
FerriteBead_0603_1.5A
Laird
L3
5
0.1UF
0.1uF
C1, C3, C39, C40, C48
10
10UF
10uF
C2, C4, C7, C8, C9, C10, C11, C13 +2
6
1UF
1uF
C5, C12, C14, C15, C49, C50
2
2.2UF
2.2uF
C42, C43
2
2.2NF
2.2nF
C51, C52
4
100
R1, R2, R12, R13
4
0
R3, R7, R15, R17
7
10K
10k
R4, R5, R6, R14, R16, R18, R19
2
470
R8, R9
4
1k
R10, R11, R20, R21
1
22
RN6

HyperNet-2-DAC design files

The KiCad project lives in the TheStaticTurtle/HyperNet repository on GitHub; these links point at the commit this page was built from.

HyperNet-2-DAC: common questions

How big is the HyperNet-2-DAC PCB?

The HyperNet-2-DAC measures 53 × 60.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HyperNet-2-DAC?

56 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HyperNet-2-DAC design files?

From the TheStaticTurtle/HyperNet repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HyperNet-2-DAC design in my own project?

Yes, under the terms of its MIT license, which TheStaticTurtle chose for the repository.

More boards in HyperNet

Similar boards