11 open source boards using the PCM5100A
Real designs built with the PCM5100A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Fosdem dual capture
FOSDEM
87.9 × 95.8 mm211 parts4LNo license114RP2040/RP2350
Platform16
lerouxb
112 × 86.3 mm108 parts2LNo license6STM32
Cheep4
emeb
38.1 × 100 mm115 parts4LMIT3ESP32
KINK-box
FunDeckHermit
100 × 60 mm103 parts2LApache-2.02ESP32
Echowawa
moonbeeper
80 × 40 mm96 parts4LNo license0RP2040/RP2350
Merch board
kaine119
86 × 54 mm83 parts2LCERN-OHL-P-2.00ESP32
Mp3player
ILikeMice
55.5 × 54 mm65 parts2LNo license0- schematic only · 134 parts
STM DrumMachine
hsetlik
134 partsNo license0 Audio test board
kaine119
25.1 × 55.8 mm32 parts2LCERN-OHL-P-2.00HyperNet-2-DAC
TheStaticTurtle
53 × 60.6 mm56 parts2LMIT5RP2040/RP2350
Jukebox
adeboni
70.8 × 108 mm158 parts2LGPL-3.00
How designs wire the PCM5100A
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PCM5100A connects to, and the resistors, capacitors and other passives placed on it.
- The CAPP pin has a series capacitor on 9 of 9 designs, most often 2.2 µF.
- The CAPM pin has a series capacitor on 9 of 9 designs, most often 2.2 µF.
- The VNEG pin has a capacitor to GND on 9 of 9 designs, most often 2.2 µF (then 100 nF).
- The OUTL pin has a series resistor on 9 of 9 designs, most often 470 Ω (then 62 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CPVDDpin 1 | Connected to: 3.3V 89% |
|
| CAPPpin 2 | Connected to: Signal 100% |
|
| CPGNDpin 3 | Connected to: GND 100% | — |
| CAPMpin 4 | Connected to: Signal 100% |
|
| VNEGpin 5 | Connected to: Signal 100% |
|
| OUTLpin 6 | Connected to: Signal 100% |
|
| OUTRpin 7 | Connected to: Signal 100% |
|
| AVDDpin 8 | Connected to: 3.3V 89% |
|
| AGNDpin 9 | Connected to: GND 100% | — |
| DEMPpin 10 | Connected to: GND 67% · a signal 33% | — |
| SCKpin 12 | Connected to: GND 67% · a signal 33% | — |
| BCKpin 13 | Connected to: The microcontroller 44% |
|
| DINpin 14 | Connected to: The microcontroller 44% |
|
| LRCKpin 15 | Connected to: The microcontroller 44% |
|
| FMTpin 16 | Connected to: GND 67% · a signal 33% | — |
| XSMTpin 17 | Connected to: The microcontroller 33%, a connector 22% · 3.3V 22% |
|
| LDOOpin 18 | Connected to: Signal 100% |
|
| DGNDpin 19 | Connected to: GND 100% | — |
| DVDDpin 20 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fosdem dual capture by FOSDEM, Platform16-pcb by lerouxb, HyperNet-2-DAC by TheStaticTurtle and Cheep4 by emeb.
The PCM5100A in open source designs
The gallery holds 11 open source boards using the PCM5100A from 10 GitHub repositories; a typical one measures about 75.4 × 60.3 mm and carries around 103 components.
70% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is Fosdem dual capture by FOSDEM.
Parts used alongside the PCM5100A
Microcontrollers on boards using the PCM5100A
What boards using the PCM5100A are built for
PCM5100A: common questions
Where can I find a PCM5100A reference design?
Each of the 11 boards on this page is a real design using the PCM5100A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PCM5100A CAPP pin connected?
The CAPP pin has a series capacitor on 9 of 9 designs, most often 2.2 µF. Counted from the KiCad layouts of 9 open source designs using the PCM5100A.
How is the PCM5100A CAPM pin connected?
The CAPM pin has a series capacitor on 9 of 9 designs, most often 2.2 µF. Counted from the KiCad layouts of 9 open source designs using the PCM5100A.
How is the PCM5100A VNEG pin connected?
The VNEG pin has a capacitor to GND on 9 of 9 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the PCM5100A.
What parts are used alongside the PCM5100A?
The W25Q128JVS, RP2040, NCP1117-3.3_SOT223 and NE5532 appear in the most repositories here.
Which microcontrollers do boards using the PCM5100A use?
Most are built on RP2040/RP2350 (4), ESP32 (3) and STM32 (1).
How big is a typical board using the PCM5100A?
The median is 75.4 × 60.3 mm, and 70% are two-layer designs.
What is the most popular open source board using the PCM5100A?
By GitHub stars, Fosdem dual capture by FOSDEM, with 114 stars.
Can I simulate one of these boards using the PCM5100A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.