HackClub-Starbie
TheTank87·HackClub-Starbie·PCB/Starbie.kicad_pcb
About the HackClub-Starbie PCB
HackClub-Starbie is an open source ESP32 PCB design by TheTank87, published on GitHub. It is a 2-layer board measuring 131.5 × 127 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the keyboards, displays & leds and sensors designs in this gallery.
From the project
Space to put all my HackClub projects.
UPDATE! I changed the overall PCB shape into an actual star instead of a pixelated one and changed the layout of the components. The main changes were the keys which are now side by side instead of up and down.
Btw, I also created this cool button you can press, it does something!
After this project gets approved, I might have to use some coins to get myself a solder, however, I could just always buy it myself later. To assembly things, I'll have to get the components as well as the board and we'll see if the components fit. Then I need to watch some videos on how to solder properly and do…
Main components on the HackClub-Starbie
HackClub-Starbie bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C6-DIP | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
HackClub-Starbie design files
The KiCad project lives in the TheTank87/HackClub-Starbie repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Starbie.kicad_pcb
- SchematicPCB/Starbie.kicad_sch
HackClub-Starbie: common questions
What microcontroller does the HackClub-Starbie use?
The HackClub-Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the HackClub-Starbie PCB?
The HackClub-Starbie measures 131.5 × 127 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HackClub-Starbie?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the HackClub-Starbie design files?
From the TheTank87/HackClub-Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HackClub-Starbie design in my own project?
The repository has no license, so all rights stay with TheTank87. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the HackClub-Starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k