SEQUENCER
theWickedWebDev·Modular-Synth·Sequencer/SEQUENCER.kicad_pcb
About the SEQUENCER PCB
SEQUENCER is an open source PCB design by theWickedWebDev, published on GitHub. It is a 2-layer board measuring 223.8 × 105.7 mm, with 102 components from 15 distinct parts.
Other key parts include the MC1458, 4017 and Eurorack_IDE_16P. By type, the board carries 31 resistors, 29 diodes, 11 switches, 9 transistors, 5 connectors and 4 ICs.
It belongs with the audio designs in this gallery.
Main components on the SEQUENCER
SEQUENCER bill of materials (BOM)
102 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MC1458 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 1 | 4017 | SO-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Eurorack_IDE_16P | IDC-Socket-Eurorack_16p_2.54mm | U3 |
| 9 | 2N2222_smd-stephen | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +1 |
| 5 | AudioJack2 | ACJS-MV35-3S-audio-jack | J1, J2, J3, J4, J5 |
| 9 | R_Potentiometer_US | Potentiometer_Omeg_PC16BU_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 +1 |
| 2 | R_Potentiometer_US | Potentiometer_Bourns_3296W_Vertical | RV10, RV11 |
| 2 | SW_DPDT_x2 | SPDT-vertical-200MSP1T2B1M2QEH | SW1, SW10 |
| 9 | SW_SPST | SPST-12mm-PushButton-Vertical | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +1 |
| 21 | BAT54J | D_SOD-123 | D1, D2, D3, D12, D13, D14, D15, D16 +13 |
| 8 | LED | LED_D5.0mm | D4, D5, D6, D7, D8, D9, D10, D11 |
| 2 | C | C_0805_2012Metric | C1, C2 |
| 2 | R_Small_US | R_0805_2012Metric-10K | R1, R3 |
| 28 | R_Small_US | R_0805_2012Metric | R2, R4, R5, R6, R7, R8, R9, R10 +20 |
| 1 | R_Small_US | R_0805_2012Metric-1K-Gray | R33 |
SEQUENCER design files
The KiCad project lives in the theWickedWebDev/Modular-Synth repository on GitHub; these links point at the commit this page was built from.
- LayoutSequencer/SEQUENCER.kicad_pcb
- SchematicSequencer/SEQUENCER.kicad_sch
SEQUENCER: common questions
How big is the SEQUENCER PCB?
The SEQUENCER measures 223.8 × 105.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SEQUENCER?
102 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the SEQUENCER design files?
From the theWickedWebDev/Modular-Synth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SEQUENCER design in my own project?
The repository has no license, so all rights stay with theWickedWebDev. Use it as a reference, and ask the author before reusing the design.
More boards in Modular-Synth
Mixer
theWickedWebDev
100 × 128.5 mm90 parts2LNo license0Vu meter
theWickedWebDev
30 × 100 mm63 parts2LNo license0VCO
theWickedWebDev
42.9 × 100.8 mm41 parts2LNo license0Ht hat cymbal cowbell
theWickedWebDev
30 × 100 mm36 parts2LNo license0Colored noise generator
theWickedWebDev
42 × 128.5 mm36 parts2LNo license0LFO
theWickedWebDev
30 × 100.8 mm32 parts2LNo license0ADSR-Generator
theWickedWebDev
54.1 × 114.1 mm31 parts2LNo license0Synth-808
theWickedWebDev
42 × 128.5 mm30 parts2LNo license0VCA
theWickedWebDev
110.5 × 34.3 mm22 parts2LNo license0Power module
theWickedWebDev
100.1 × 38.9 mm20 parts2LNo license0Amplifier
theWickedWebDev
100.1 × 45.5 mm19 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687