Ht hat cymbal cowbell
theWickedWebDev·Modular-Synth·Percussion-Hi-Hat_Cymbal_Cowbell/ht-hat-cymbal-cowbell.kicad_pcb
About the Ht hat cymbal cowbell
Ht hat cymbal cowbell is an open source PCB design by theWickedWebDev, published on GitHub. It is a 2-layer board measuring 30 × 100 mm, with 36 components from 13 distinct parts.
Other key parts include the Eurorack_IDE_16P, TL072, 40106 and 4070. By type, the board carries 9 resistors, 7 capacitors, 4 ICs, 4 diodes, 2 connectors and 1 transistor.
It belongs with the audio and dev boards & breakouts designs in this gallery.
Main components on the Ht hat cymbal cowbell
Ht hat cymbal cowbell bill of materials (BOM)
36 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Eurorack_IDE_16P | IDC-Socket-Eurorack_16p_2.54mm | U1 |
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 40106 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | 4070 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | 2N2222_smd-stephen | SOT-23 | Q1 |
| 2 | AudioJack2_Ground | 3.5mm-mono-jack-eurorack-2 | J1, J2 |
| 1 | MountingHole | 3.2mm-mounting-hole-eurorack | H1 |
| 6 | R_Potentiometer_US | alpha-9mm-potentiometer | RV1, RV2, RV3, RV4, RV5, RV6 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | VAL** | mouse-bite-2mm-slot | mouse-bite-2mm-slot |
| 4 | BAT43W-V | D_SOD-123 | D1, D2, D3, D4 |
| 7 | C_Small | C_0805_2012Metric | C1, C2, C3, C4, C5, C7, C8 |
| 9 | R_Small_US | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
Ht hat cymbal cowbell design files
The KiCad project lives in the theWickedWebDev/Modular-Synth repository on GitHub; these links point at the commit this page was built from.
Ht hat cymbal cowbell: common questions
How big is the Ht hat cymbal cowbell?
The Ht hat cymbal cowbell measures 30 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ht hat cymbal cowbell?
36 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ht hat cymbal cowbell design files?
From the theWickedWebDev/Modular-Synth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ht hat cymbal cowbell design in my own project?
The repository has no license, so all rights stay with theWickedWebDev. Use it as a reference, and ask the author before reusing the design.
More boards in Modular-Synth
SEQUENCER
theWickedWebDev
223.8 × 105.7 mm102 parts2LNo license0Mixer
theWickedWebDev
100 × 128.5 mm90 parts2LNo license0Vu meter
theWickedWebDev
30 × 100 mm63 parts2LNo license0VCO
theWickedWebDev
42.9 × 100.8 mm41 parts2LNo license0Colored noise generator
theWickedWebDev
42 × 128.5 mm36 parts2LNo license0LFO
theWickedWebDev
30 × 100.8 mm32 parts2LNo license0ADSR-Generator
theWickedWebDev
54.1 × 114.1 mm31 parts2LNo license0Synth-808
theWickedWebDev
42 × 128.5 mm30 parts2LNo license0VCA
theWickedWebDev
110.5 × 34.3 mm22 parts2LNo license0Power module
theWickedWebDev
100.1 × 38.9 mm20 parts2LNo license0Amplifier
theWickedWebDev
100.1 × 45.5 mm19 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k