Synth-808
theWickedWebDev·Modular-Synth·Percussion-808-Kick/synth-808.kicad_pcb
About the Synth-808 PCB
Synth-808 is an open source PCB design by theWickedWebDev, published on GitHub. It is a 2-layer board measuring 42 × 128.5 mm, with 30 components from 12 distinct parts.
Other key parts include the TL072 and Eurorack_IDE_16P. By type, the board carries 13 resistors, 5 capacitors, 2 ICs, 2 connectors, 1 switch and 1 diode.
It belongs with the audio designs in this gallery.
Main components on the Synth-808
Synth-808 bill of materials (BOM)
30 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 | SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Eurorack_IDE_16P | IDC-Socket-Eurorack_16p_2.54mm | U2 |
| 2 | AudioJack2_Ground | 3.5mm-mono-jack-eurorack-2 | J1, J2 |
| 2 | MountingHole | 3.2mm-mounting-hole-eurorack | H1, H2 |
| 2 | R_Potentiometer_US | alpha-9mm-potentiometer | RV1, RV2 |
| 1 | R_Potentiometer_US | Potentiometer_Bourns_3224G_Horizontal | RV3 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | VAL** | mouse-bite-2mm-slot | mouse-bite-2mm-slot |
| 1 | BAT54J | D_SOD-123 | D1 |
| 4 | C | C_0805_2012Metric | C1, C2, C3, C5 |
| 1 | C_Polarized | CP_Elec_5x5.4 | C4 |
| 13 | R_Small_US | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +5 |
Synth-808 design files
The KiCad project lives in the theWickedWebDev/Modular-Synth repository on GitHub; these links point at the commit this page was built from.
Synth-808: common questions
How big is the Synth-808 PCB?
The Synth-808 measures 42 × 128.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Synth-808?
30 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Synth-808 design files?
From the theWickedWebDev/Modular-Synth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Synth-808 design in my own project?
The repository has no license, so all rights stay with theWickedWebDev. Use it as a reference, and ask the author before reusing the design.
More boards in Modular-Synth
SEQUENCER
theWickedWebDev
223.8 × 105.7 mm102 parts2LNo license0Mixer
theWickedWebDev
100 × 128.5 mm90 parts2LNo license0Vu meter
theWickedWebDev
30 × 100 mm63 parts2LNo license0VCO
theWickedWebDev
42.9 × 100.8 mm41 parts2LNo license0Colored noise generator
theWickedWebDev
42 × 128.5 mm36 parts2LNo license0Ht hat cymbal cowbell
theWickedWebDev
30 × 100 mm36 parts2LNo license0LFO
theWickedWebDev
30 × 100.8 mm32 parts2LNo license0ADSR-Generator
theWickedWebDev
54.1 × 114.1 mm31 parts2LNo license0VCA
theWickedWebDev
110.5 × 34.3 mm22 parts2LNo license0Power module
theWickedWebDev
100.1 × 38.9 mm20 parts2LNo license0Amplifier
theWickedWebDev
100.1 × 45.5 mm19 parts2LNo license0
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687