8 open source boards using the TSR1-2433E
Real designs built with the TSR1-2433E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Schemav2
rayanyahiaoui13
160.5 × 146.5 mm139 parts2LGPL-3.01STM32
GaiForgeWeb-
GaiaForge
104.9 × 78 mm81 parts2LNo license1Spinal-Disc-Replacement-Code
ShadeStar44
70 × 83 mm43 parts2LNo license0ESP32
UniBoard-Xiao
Unimakers
80 × 80 mm36 parts2LNo license0RP2040/RP2350
Laas stepper
thomasfla
100 × 60 mm26 parts2LBSD-3-Clause0ESP32
Ac vent controller
Pierowheelz
89.5 × 49 mm15 parts2LNo license0RP2040/RP2350
Laas single stepper withdcdc
thomasfla
52 × 30 mm20 parts2LBSD-3-Clause0Spi
atarola
102.5 × 44.8 mm20 parts2LNo license0
How designs wire the TSR1-2433E
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TSR1-2433E connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a capacitor to GND on 4 of 7 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: A connector 43% · 5V 43% |
|
| GNDpin 2 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GaiForgeWeb- by GaiaForge, Schemav2 by rayanyahiaoui13, Spi by atarola and Ac vent controller by Pierowheelz.
The TSR1-2433E in open source designs
The gallery holds 8 open source boards using the TSR1-2433E from 7 GitHub repositories; a typical one measures about 94.8 × 69 mm and carries around 31 components.
100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is Schemav2 by rayanyahiaoui13.
Parts used alongside the TSR1-2433E
Microcontrollers on boards using the TSR1-2433E
What boards using the TSR1-2433E are built for
TSR1-2433E: common questions
Where can I find a TSR1-2433E reference design?
Each of the 8 boards on this page is a real design using the TSR1-2433E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TSR1-2433E VIN pin connected?
The VIN pin has a capacitor to GND on 4 of 7 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TSR1-2433E.
Which microcontrollers do boards using the TSR1-2433E use?
Most are built on ESP32 (3), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the TSR1-2433E?
The median is 94.8 × 69 mm, and 100% are two-layer designs.
What is the most popular open source board using the TSR1-2433E?
By GitHub stars, Schemav2 by rayanyahiaoui13, with 1 stars.
Can I simulate one of these boards using the TSR1-2433E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.