HardLabs

RocketFlightController

Tiladura·RocketFlightController·Kicad files/kicad.kicad_pcb

RocketFlightController PCB layout, top view — open source ESP32 board by Tiladura

About the RocketFlightController PCB

RocketFlightController is an open source ESP32 PCB design by Tiladura, published on GitHub. It is a 2-layer board measuring 63 × 62 mm, with 25 components from 15 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the MPU-6050, BMP280 and AMS1117-3.3. By type, the board carries 7 connectors, 7 capacitors, 5 resistors, 4 ICs and 2 switches.

It belongs with the iot & wireless, robotics & motion and sensors designs in this gallery.

From the project

And there is a bunch of capacitors, resistors, some buttons which are all used on a single custom PCB, all parts of which i will list in BOM list in the end.

And there is a bunch of capacitors, resistors, some buttons which are all used on a single custom PCB, all parts of which i will list in BOM list in the end.

All parts will be hand soldered by me. PCB contains smd and tht components:

RocketFlightController, from the project README
From the project README

Main components on the RocketFlightController

ESP32-WROOM-32EMPU-6050BMP280AMS1117-3.3

RocketFlightController bill of materials (BOM)

25 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E
U1
1
MPU-6050
U2
1
BMP280
U3
1
AMS1117-3.3
U4
4
CONN_01X03_PIN
Conn_01x03_Pin
J1, J2, J3, J4
1
SERVO_POWER_IN
J5
1
LOGIC_POWER_IN
J6
1
UART_PROGRAM
J7
1
RESET
SW1
1
BOOT
SW2
3
100N
100n
C1, C3, C4
3
10U
10u
C2, C6, C7
1
470U
470u
C5
2
4.7K
4.7k
R1, R2
3
10K
10k
R3, R4, R5

RocketFlightController design files

The KiCad project lives in the Tiladura/RocketFlightController repository on GitHub; these links point at the commit this page was built from.

RocketFlightController: common questions

What microcontroller does the RocketFlightController use?

The RocketFlightController is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the RocketFlightController PCB?

The RocketFlightController measures 63 × 62 mm, has 2 copper layers and is 1 mm thick.

How many components are on the RocketFlightController?

25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RocketFlightController design files?

From the Tiladura/RocketFlightController repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RocketFlightController design in my own project?

The repository has no license, so all rights stay with Tiladura. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RocketFlightController without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards