Analog matrix 4x4

tim4431·analog_programmable_matrix·pcb/analog_matrix_4x4_rev_d/analog_matrix_4x4.kicad_pcb

Analog matrix 4x4 PCB layout, top view — open source RP2040/RP2350 board by tim4431

About the Analog matrix 4x4 PCB

Analog matrix 4x4 is an open source RP2040/RP2350 PCB design by tim4431, published on GitHub. It is a 4-layer board measuring 160 × 170 mm, with 428 components from 38 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the OPA810ID, AD5544BRSZ, TMUX6219DGKR, ADA4899-1YRDZ and THS3091DDAR. By type, the board carries 200 capacitors, 146 resistors, 71 ICs, 9 connectors and 2 diodes.

From the project

DC-coupled 4x4 programmable analog matrix: signed gains, 1 MHz target, BNC I/O, Pico control, KiCad PCB and enclosure CAD.

REVISION D / MECHANICAL M3 - COMPACT LAYOUT PCB shrinks from Rev C 180 x 210 to 160 x 170 mm (28.04% less area). The M3 enclosure is 180 x 192 x 60 mm (25.52% less footprint than M2). Eight vertical 50-ohm BNCs retain 30 mm row pitch. Power entry faces outward at the right edge. Heatsink envelopes remain 35 x 13 x 38.1 mm. The 36 protected inverting-node copper shapes are rigidly translated intact; other routing and component placements change. Circuit values, MCU and firmware are unchanged. No PCB parasitic extraction has been performed. Use Rev D manufacturing files with M3 mechanics…

Main components on the Analog matrix 4x4

Analog matrix 4x4 bill of materials (BOM)

428 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
OPA810ID
U1, U2, U3, U4, U5, U6, U7, U8 +8
5
AD5544BRSZ
U20, U21, U22, U23, U30
20
TMUX6219DGKR
U40, U41, U42, U43, U44, U45, U46, U47 +12
16
ADA4899-1YRDZ
U60, U61, U62, U63, U64, U65, U66, U67 +8
4
THS3091DDAR
U90, U91, U92, U93
4
OPA197ID
U100, U101, U102, U103
1
ADR4525BRZ
U110
1
Pico
U120
2
SN74HC595D
U121, U122
1
L7805CV
U130
1
L7905CV
U131
8
BNC 031-5329-52RFX
J1, J2, J3, J4, J5, J6, J7, J8
1
3-pin terminal
J9
2
1N4002
D1, D2
136
100n
C1, C2, C3, C4, C5, C6, C9, C10 +128
18
10u
C7, C8, C15, C16, C23, C24, C31, C32 +10
12
1u
C34, C36, C68, C70, C102, C104, C136, C138 +4
16
2.2p
C41, C46, C51, C56, C75, C80, C85, C90 +8
8
6.8u
C65, C66, C99, C100, C133, C134, C167, C168
4
100p C0G
C175, C178, C181, C184
Show 18 more
QtyPartRefs
2
47u
C193, C197
1
330n
C194
2
10u
C195, C199
1
2.2u
C198
9
33R
R1, R10, R19, R28, R133, R134, R135, R136 +1
4
1 M
R2, R11, R20, R29
8
49.9R
R3, R12, R21, R30, R56, R80, R104, R128
8
499R
R4, R5, R13, R14, R22, R23, R31, R32
32
1.00 k
R6, R7, R8, R9, R15, R16, R17, R18 +24
32
150R 0.1%
R37, R38, R41, R42, R45, R46, R49, R50 +24
20
100 k
R39, R43, R47, R51, R57, R63, R67, R71 +12
4
523R
R53, R77, R101, R125
4
10.0 k
R54, R78, R102, R126
4
20.0 k
R55, R79, R103, R127
4
1.21 k
R58, R82, R106, R130
4
402R
R59, R83, R107, R131
4
49.9R
R60, R84, R108, R132
9
10 k
R138, R139, R140, R141, R142, R143, R144, R145 +1

Analog matrix 4x4 design files

The KiCad project lives in the tim4431/analog_programmable_matrix repository on GitHub; these links point at the commit this page was built from.

Analog matrix 4x4: common questions

What microcontroller does the Analog matrix 4x4 use?

The Analog matrix 4x4 is built around the Pico, from the RP2040/RP2350 family.

How big is the Analog matrix 4x4 PCB?

The Analog matrix 4x4 measures 160 × 170 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Analog matrix 4x4?

428 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Analog matrix 4x4 design files?

From the tim4431/analog_programmable_matrix repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Analog matrix 4x4 design in my own project?

The repository has no license, so all rights stay with tim4431. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Analog matrix 4x4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in analog_programmable_matrix

Similar boards