Analog matrix 4x4 3d

tim4431·analog_programmable_matrix·mechanical/analog_matrix_package_m3/analog_matrix_4x4_3d.kicad_pcb

Analog matrix 4x4 3d PCB layout, top view — open source RP2040/RP2350 board by tim4431

About the Analog matrix 4x4 3d PCB

Analog matrix 4x4 3d is an open source RP2040/RP2350 PCB design by tim4431, published on GitHub. It is a 4-layer board measuring 160 × 170 mm, with 428 components from 38 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the OPA810ID, AD5544BRSZ, TMUX6219DGKR, ADA4899-1YRDZ and THS3091DDAR. By type, the board carries 200 capacitors, 146 resistors, 71 ICs, 9 connectors and 2 diodes.

It belongs with the audio designs in this gallery.

From the project

DC-coupled 4x4 programmable analog matrix: signed gains, 1 MHz target, BNC I/O, Pico control, KiCad PCB and enclosure CAD.

A four-input, four-output, DC-coupled analog matrix for programmable addition, subtraction, and signal mixing. A Raspberry Pi Pico sets sixteen static signed coefficients over USB; the signals remain in the analog domain.

$$bi = \sum{j=0}^{3} M{ij}aj, \qquad -1 \leq M_{ij} \leq 1$$

This first public version contains PCB D and enclosure M3, without the added power-indicator LED. It is an unbuilt prototype: the 1 MHz bandwidth and approximately 1% gain accuracy are design targets supported by circuit simulations, not measured hardware specifications.

Analog matrix 4x4 3d, from the project README
From the project README

Main components on the Analog matrix 4x4 3d

Analog matrix 4x4 3d bill of materials (BOM)

428 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
OPA810ID
U1, U2, U3, U4, U5, U6, U7, U8 +8
5
AD5544BRSZ
U20, U21, U22, U23, U30
20
TMUX6219DGKR
U40, U41, U42, U43, U44, U45, U46, U47 +12
16
ADA4899-1YRDZ
U60, U61, U62, U63, U64, U65, U66, U67 +8
4
THS3091DDAR
U90, U91, U92, U93
4
OPA197ID
U100, U101, U102, U103
1
ADR4525BRZ
U110
1
Pico
U120
2
SN74HC595D
U121, U122
1
L7805CV
U130
1
L7905CV
U131
8
BNC 031-5329-52RFX
J1, J2, J3, J4, J5, J6, J7, J8
1
3-pin terminal
J9
2
1N4002
D1, D2
136
100n
C1, C2, C3, C4, C5, C6, C9, C10 +128
18
10u
C7, C8, C15, C16, C23, C24, C31, C32 +10
12
1u
C34, C36, C68, C70, C102, C104, C136, C138 +4
16
2.2p
C41, C46, C51, C56, C75, C80, C85, C90 +8
8
6.8u
C65, C66, C99, C100, C133, C134, C167, C168
4
100p C0G
C175, C178, C181, C184
Show 18 more
QtyPartRefs
2
47u
C193, C197
1
330n
C194
2
10u
C195, C199
1
2.2u
C198
9
33R
R1, R10, R19, R28, R133, R134, R135, R136 +1
4
1 M
R2, R11, R20, R29
8
49.9R
R3, R12, R21, R30, R56, R80, R104, R128
8
499R
R4, R5, R13, R14, R22, R23, R31, R32
32
1.00 k
R6, R7, R8, R9, R15, R16, R17, R18 +24
32
150R 0.1%
R37, R38, R41, R42, R45, R46, R49, R50 +24
20
100 k
R39, R43, R47, R51, R57, R63, R67, R71 +12
4
523R
R53, R77, R101, R125
4
10.0 k
R54, R78, R102, R126
4
20.0 k
R55, R79, R103, R127
4
1.21 k
R58, R82, R106, R130
4
402R
R59, R83, R107, R131
4
49.9R
R60, R84, R108, R132
9
10 k
R138, R139, R140, R141, R142, R143, R144, R145 +1

Analog matrix 4x4 3d design files

The KiCad project lives in the tim4431/analog_programmable_matrix repository on GitHub; these links point at the commit this page was built from.

Analog matrix 4x4 3d: common questions

What microcontroller does the Analog matrix 4x4 3d use?

The Analog matrix 4x4 3d is built around the Pico, from the RP2040/RP2350 family.

How big is the Analog matrix 4x4 3d PCB?

The Analog matrix 4x4 3d measures 160 × 170 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Analog matrix 4x4 3d?

428 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Analog matrix 4x4 3d design files?

From the tim4431/analog_programmable_matrix repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Analog matrix 4x4 3d design in my own project?

The repository has no license, so all rights stay with tim4431. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Analog matrix 4x4 3d without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in analog_programmable_matrix

Similar boards