Compute unit STM32G4RCT6
Tim4769·Microver·hardware/final/final_compute_STM32_rev_a/Kicad_Microver2026_STM32_Control/Microver2026_STM32_Control.kicad_pcb
About the Compute unit STM32G4RCT6 PCB
Compute unit STM32G4RCT6 is an open source STM32 PCB design by Tim4769, published on GitHub under the Custom license license. It is a 4-layer board measuring 63 × 28 mm, with 54 components from 23 distinct parts.
Its main chip is the C2653552, from the STM32 family. By type, the board carries 33 resistors, 14 capacitors, 4 connectors, 2 ICs and 1 inductor.
From the project
Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.
- Owner / Contact: Tim Wang - timwang007@outlook.com - Revision: Rev A - Project: Project CK
Mate this board only after confirming J14 and J15 orientation against ../finalcontrolboardreva/.
Main components on the Compute unit STM32G4RCT6
Compute unit STM32G4RCT6 bill of materials (BOM)
54 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2653552 STM32G473RCT6 | LQFP64-10x10mm | U1 |
| 1 | C2653552 MIC5365-3.3YD5 | SOT-23-5 | U2 |
| 1 | C2937625 Pi URAT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | C492401 TC2030 | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | C492427 Left | PinHeader_2x10_P2.54mm_Vertical | J14 |
| 1 | C492427 Right | PinHeader_2x10_P2.54mm_Vertical | J15 |
| 1 | FerriteBead_Small | R_0603_1608Metric | FB1 |
| 3 | C106697 100nF | C_0603_1608Metric | C1, C3, C7 |
| 2 | C19666 4.7uF | C_0603_1608Metric | C2, C6 |
| 2 | C29823 100nF | C_0603_1608Metric | C4, C5 |
| 1 | C116389 4.7uF | C_0603_1608Metric | C8 |
| 1 | C116389 100nF | C_0603_1608Metric | C9 |
| 2 | 1uF | C_0603_1608Metric | C10, C12 |
| 1 | 100nF | C_0603_1608Metric | C11 |
| 2 | 10nF | C_0603_1608Metric | C13, C14 |
| 1 | C23138 100Ω | R_0603_1608Metric | R1 |
| 1 | C22765 100Ω | R_0603_1608Metric | R2 |
| 1 | C23212 100Ω | R_0603_1608Metric | R3 |
| 15 | 100Ω | R_0603_1608Metric | R4, R5, R7, R8, R11, R18, R19, R20 +7 |
| 7 | 1kΩ | R_0603_1608Metric | R6, R14, R16, R17, R22, R29, R31 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 3.3kΩ | R_0603_1608Metric | R9, R10, R15, R24, R26 |
| 2 | 680Ω | R_0603_1608Metric | R12, R27 |
| 1 | 10kΩ | R_0603_1608Metric | R13 |
Compute unit STM32G4RCT6 design files
The KiCad project lives in the Tim4769/Microver repository on GitHub; these links point at the commit this page was built from.
Compute unit STM32G4RCT6: common questions
What microcontroller does the Compute unit STM32G4RCT6 use?
The Compute unit STM32G4RCT6 is built around the C2653552, from the STM32 family.
How big is the Compute unit STM32G4RCT6 PCB?
The Compute unit STM32G4RCT6 measures 63 × 28 mm, has 4 copper layers and is 1.599 mm thick.
How many components are on the Compute unit STM32G4RCT6?
54 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Compute unit STM32G4RCT6 design files?
From the Tim4769/Microver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Compute unit STM32G4RCT6 design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Compute unit STM32G4RCT6 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Microver
18V to 5V 15A buck converter
Tim4769
45 × 62 mm49 parts4LCustom license015-22V to 36V Boost converter
Tim4769
73 × 48 mm49 parts4LCustom license0Microver2026 Modular Final
Tim4769
100 × 135 mm47 parts4LCustom license0AVR/Arduino
Arduinos Compute Unit
Tim4769
70 × 45 mm37 parts4LCustom license0Reverse and surge current protection
Tim4769
56 × 61 mm36 parts4LCustom license0NXP
High side or ing power selection
Tim4769
36 × 31 mm13 parts4LCustom license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k