15-22V to 36V Boost converter

Tim4769·Microver·hardware/final/boost_manufacturing_rev_c/Kicad_Boost converter/Boost converter.kicad_pcb

15-22V to 36V Boost converter PCB layout, top view — open source board by Tim4769

About the 15-22V to 36V Boost converter PCB

15-22V to 36V Boost converter is an open source PCB design by Tim4769, published on GitHub under the Custom license license. It is a 4-layer board measuring 73 × 48 mm, with 49 components from 32 distinct parts.

Other key parts include the C2653552. By type, the board carries 20 capacitors, 18 resistors, 4 transistors, 3 connectors, 1 IC and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Owner / Contact: Tim Wang — timwang007@outlook.com Revision: Rev C Date: 2026-04-13 Project: Project CK

15-22V to 36V Boost converter, from the project README
From the project README

Main components on the 15-22V to 36V Boost converter

C2653552

15-22V to 36V Boost converter bill of materials (BOM)

49 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2653552
LM5122QMHX/NOPB
U1
4
CSD18540Q5B
Q1, Q2, Q3, Q4
1
C2937625
Conn_01x02_Socket
J1
1
C492401
Conn_01x02_Socket
J2
1
Conn_01x02_Pin
J4
1
2N7002
MOSFET1
1
C126319
D_Schottky
D1
1
10uH
L1
1
C106697
150pF
C1
1
C19666
470nF
C2
1
C106697
220nF
C3
1
C29823
1uF
C4
1
C29823
470nF
C5
1
C19666
680pF
C6
1
C106697
220nF
C7
2
C116389
10uF
C8, C9
2
470uF
C10, C12
8
10uF
C11, C13, C14, C15, C17, C18, C19, C20
1
C106697
10uF
C16
1
C23138
49.9kΩ
R1
Show 12 more
QtyPartRefs
1
C22765
5.1kΩ
R2
1
C23212
100Ω
R3
1
3.01Ω
R4
1
2mΩ
R5
2
160kΩ
R6, R8
2
56kΩ
R7, R12
4
2Ω
R9, R16, R17, R18
1
2kΩ
R10
1
12kΩ
R11
1
100Ω
R13
1
1.5kΩ
R14
1
270kΩ
R15

15-22V to 36V Boost converter design files

The KiCad project lives in the Tim4769/Microver repository on GitHub; these links point at the commit this page was built from.

15-22V to 36V Boost converter: common questions

How big is the 15-22V to 36V Boost converter PCB?

The 15-22V to 36V Boost converter measures 73 × 48 mm, has 4 copper layers and is 1.599 mm thick.

How many components are on the 15-22V to 36V Boost converter?

49 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 15-22V to 36V Boost converter design files?

From the Tim4769/Microver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 15-22V to 36V Boost converter design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in Microver

Similar boards