Reverse and surge current protection

Tim4769·Microver·hardware/final/protection_board_manufacturing_rev_b/Kicad_Protection/Protection.kicad_pcb

Reverse and surge current protection PCB layout, top view — open source board by Tim4769

About the Reverse and surge current protection PCB

Reverse and surge current protection is an open source PCB design by Tim4769, published on GitHub under the Custom license license. It is a 4-layer board measuring 56 × 61 mm, with 36 components from 32 distinct parts.

Other key parts include the C2653552 and C840100. By type, the board carries 14 resistors, 9 capacitors, 4 diodes, 3 ICs, 3 transistors and 3 connectors.

From the project

Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Owner / Contact: Tim Wang — timwang007@outlook.com Revision: Rev B Date: 2026-01-26 (Rev B release) Last updated: 2026-03-07 (layout/documentation update)

Reverse and surge current protection, from the project README
From the project README

Main components on the Reverse and surge current protection

C2653552C840100

Reverse and surge current protection bill of materials (BOM)

36 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2653552
LM74700QDBVRQ1
U1
1
C2653552
LM5069MMX-2/NOPB
U2
1
C840100
MMBT5401LT1G
U3
3
CSD19536KTT
Q1, Q2, Q3
1
C2937625
Conn_01x02_Socket
J1
1
C492401
Conn_01x02_Socket
J2
1
C492401
Conn_01x02_Socket
J3
1
C126319
D_TVS
D1
1
C22371297
D_TVS
D2
1
C22371297
D_Schottky
D3
1
1N4148W
D4
1
C19666
100nF
C2
1
C106697
1uF
C3
1
C29823
220uF
C4
1
C29823
100nF
C5
1
C19666
6.8uF
C6
1
C106697
220uF
C7
1
C116389
100nF
C8
1
C116389
47nF
C9
1
100nF
C10
Show 12 more
QtyPartRefs
1
C23138
47kΩ
R1
1
C22765
620Ω
R2
1
C23212
2kΩ
R3
1
7.5kΩ
R4
1
24kΩ
R5
1
620Ω
R6
1
3kΩ
R7
2
5mΩ
R9, R10
2
10Ω
R11, R12
1
22kΩ
R13
1
100kΩ
R14
1
1kΩ
R15

Reverse and surge current protection design files

The KiCad project lives in the Tim4769/Microver repository on GitHub; these links point at the commit this page was built from.

Reverse and surge current protection: common questions

How big is the Reverse and surge current protection PCB?

The Reverse and surge current protection measures 56 × 61 mm, has 4 copper layers and is 1.599 mm thick.

How many components are on the Reverse and surge current protection?

36 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Reverse and surge current protection design files?

From the Tim4769/Microver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Reverse and surge current protection design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in Microver