18V to 5V 15A buck converter

Tim4769·Microver·hardware/final/buck_manufacturing_rev_c/Kicad_Buck/Buck.kicad_pcb

18V to 5V 15A buck converter PCB layout, top view — open source board by Tim4769

About the 18V to 5V 15A buck converter PCB

18V to 5V 15A buck converter is an open source PCB design by Tim4769, published on GitHub under the Custom license license. It is a 4-layer board measuring 45 × 62 mm, with 49 components from 34 distinct parts.

Other key parts include the C2653552. By type, the board carries 24 capacitors, 16 resistors, 4 transistors, 2 connectors, 1 IC and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

Swiss Rover Challenge rover project with final electronics, mechanical handoff files, PCB validation firmware, and shared project assets.

Owner / Contact: Tim Wang — timwang007@outlook.com Revision: Rev C Date: 2026-04-05 Project: Project CK

18V to 5V 15A buck converter, from the project README
From the project README

Main components on the 18V to 5V 15A buck converter

C2653552

18V to 5V 15A buck converter bill of materials (BOM)

49 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C2653552
LM5146QRGYTQ1
U1
4
BSC032N04LS
Infineon Technologies
Q1, Q2, Q3, Q4
1
C2937625
Conn_01x02_Socket
J1
1
C492401
Conn_01x02_Socket
J2
1
C126319
R LED
D1
1
3.3uH
L1
1
C106697
220 uF
C1
2
C19666
4.7 uF
C2, C6
2
C106697
4.7 uF
C3, C7
1
C29823
4.7 uF
C4
1
C29823
2.2 μF
C5
1
C116389
1uF
C8
1
C116389
4.7 uF
C9
2
0.1 μF
C10, C12
1
10 pF
C11
1
4.7nF
C13
1
68pF
C14
6
47 μF
C15, C18, C19, C20, C22, C23
1
C106697
47 μF
C16
1
2.7nF
C17
Show 14 more
QtyPartRefs
1
680 µF
C21
1
1nF
C24
1
C23138
4.7 kΩ
R1
1
C22765
33kΩ
R2
1
C23212
49.9kΩ
R3
1
4.7kΩ
R4
1
4.3kΩ
R5
1
510Ω
R6
1
7.5 kΩ
R7
1
430Ω
R8
1
22kΩ
R9
5
2Ω
R10, R12, R13, R14, R15
1
1Ω
R11
1
9.1kΩ
R20

18V to 5V 15A buck converter design files

The KiCad project lives in the Tim4769/Microver repository on GitHub; these links point at the commit this page was built from.

18V to 5V 15A buck converter: common questions

How big is the 18V to 5V 15A buck converter PCB?

The 18V to 5V 15A buck converter measures 45 × 62 mm, has 4 copper layers and is 1.599 mm thick.

How many components are on the 18V to 5V 15A buck converter?

49 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 18V to 5V 15A buck converter design files?

From the Tim4769/Microver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 18V to 5V 15A buck converter design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in Microver

Similar boards