Business card
tingtt·business-card·modu-tone/business-card.kicad_pcb
About the Business card PCB
Business card is an open source RP2040/RP2350 PCB design by tingtt, published on GitHub. It is a 2-layer board measuring 91 × 55 mm, with 39 components from 20 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, TPD4E05U06DQAR, NCP1117LPST33T3G and CD74HC4067PW. By type, the board carries 17 capacitors, 11 resistors, 5 ICs, 2 connectors, 2 switches and 1 crystal.
From the project
- modu-tone: modu-tone PCB business card
Main components on the Business card
Business card bill of materials (BOM)
39 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | TPD4E05U06DQAR | USON-10_2.5x1.0mm_P0.5mm | U2 |
| 1 | NCP1117LPST33T3G | SOT-223-3_TabPin2 | U3 |
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U4 |
| 1 | CD74HC4067PW | SSOP-24_5.3x8.2mm_P0.65mm | U5 |
| 1 | 12MHz 18pF | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_02x12 | PinHeader_2x12_P2.54mm_Vertical | J3 |
| 2 | TS-1088R-020 | SW_SPST_TS-1088-xR020 | SW1, SW2 |
| 1 | RB521S30T1G | D_SOD-523 | D1 |
| 3 | 1u | C_0402_1005Metric | C1, C7, C10 |
| 2 | 10u | C_0402_1005Metric | C2, C3 |
| 2 | 27p | C_0402_1005Metric | C4, C5 |
| 10 | 100n | C_0402_1005Metric | C6, C8, C9, C11, C12, C13, C14, C15 +2 |
| 2 | 1k | R_0402_1005Metric | R1, R7 |
| 3 | 10k | R_0402_1005Metric | R2, R6, R11 |
| 2 | 5.1k | R_0402_1005Metric | R3, R4 |
| 1 | 5.6k | R_0402_1005Metric | R5 |
| 2 | 27 | R_0402_1005Metric | R8, R9 |
| 1 | 100 | R_0402_1005Metric | R10 |
Business card design files
The KiCad project lives in the tingtt/business-card repository on GitHub; these links point at the commit this page was built from.
Business card: common questions
What microcontroller does the Business card use?
The Business card is built around the RP2040, from the RP2040/RP2350 family.
How big is the Business card PCB?
The Business card measures 91 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Business card?
39 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Business card design files?
From the tingtt/business-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Business card design in my own project?
The repository has no license, so all rights stay with tingtt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Business card without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k