HardLabs

Servo adapter

Tinkerbug-Robotics·TinkerRocket·hardware/legacy/servo-adapter/servo-adapter.kicad_pcb

Servo adapter PCB layout, top view — open source board by Tinkerbug-Robotics

About the Servo adapter PCB

Servo adapter is an open source PCB design by Tinkerbug-Robotics, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 24.4 × 16.4 mm, with 14 components from 8 distinct parts.

By type, the board carries 5 capacitors, 5 resistors, 3 connectors and 1 diode.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

Model rocket flight computer, ground station, iOS app, and simulation

Boards that are no longer part of the product line (see ../README.md), kept whole so that nothing is lost. Each one still opens in KiCad and can still be re-plotted. tools/checkboardparity.py scans this folder too, and passes all but base-station, which it exempts: R13 and R16, the TPS63020 feedback divider, left the schematic in 0f721aa6, and the V6 layout was never synced to match.

Servo adapter bill of materials (BOM)

14 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BM05B-SRSS-TB
Conn_01x06_Pin
JST
J1
1
JL212R-SMT-35005BP1
6130XX21021_61300621021
JILN
J2
1
878321620
6130XX21021_61300621021
Molex
J3
1
BAT54XV2T1G
White
onsemi
D1
4
CL21A226MOQNNNE
22 uF
Samsung
C1, C2, C3, C4
1
TCJE337M016R0050
Samsung
C5
4
RC0402FR-07330RL
330
Yageo
R1, R2, R3, R4
1
RC0402FR-07100KL
10 k
Yageo
R13

Servo adapter design files

The KiCad project lives in the Tinkerbug-Robotics/TinkerRocket repository on GitHub; these links point at the commit this page was built from.

Servo adapter: common questions

How big is the Servo adapter PCB?

The Servo adapter measures 24.4 × 16.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Servo adapter?

14 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Servo adapter design files?

From the Tinkerbug-Robotics/TinkerRocket repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Servo adapter design in my own project?

Yes, under the terms of its GPL-3.0 license, which Tinkerbug-Robotics chose for the repository.

More boards in TinkerRocket

Similar boards