SAM-M10Q GNSS carrier, LDO supply
About the SAM-M10Q GNSS carrier, LDO supply PCB
SAM-M10Q GNSS carrier, LDO supply is an open source PCB design by Tinkerbug-Robotics, published on GitHub under the GPL-3.0 license. It is a 6-layer board measuring 22 × 27.5 mm, with 22 components from 13 distinct parts.
Other key parts include the SAM-M10Q-00B and ADP7142ARDZ-3.3. By type, the board carries 8 capacitors, 6 resistors, 3 diodes, 2 ICs and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
Model rocket flight computer, ground station, iOS app, and simulation
KiCad design sources for the TinkerRocket boards. Imported from the local Circuit Board Designs/ folder — see #596 for the rationale and the size analysis behind what is and isn't tracked here.
These design files are licensed under the CERN Open Hardware Licence v2 — Strongly Reciprocal (CERN-OHL-S-2.0), which is separate from the GPL covering the software. If you distribute a product based on them, or publish a modified design, the complete sources must be available under the same licence.
Main components on the SAM-M10Q GNSS carrier, LDO supply
SAM-M10Q GNSS carrier, LDO supply bill of materials (BOM)
22 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SAM-M10Q-00B | XCVR_SAM-M10Q-00B | U1 |
| 1 | ADP7142ARDZ-3.3 | SOIC127P600X175-9N | U2 |
| 1 | BM05B-SRSS-TB | CONN_BM05B-SRSS-TB_JST | J3 |
| 1 | DLW21SN670HQ2L | FIL_DLW21SN670HQ2L | FL1 |
| 1 | BLM18PG471SN1D | BEADC1608X95N | FL2 |
| 2 | XL-1005UGC Green | LED_0402_1005Metric | D1, D3 |
| 1 | SMF10A | D_SMF | D2 |
| 3 | CL21A226MOQNNNE 22 uF | C_0805_2012Metric | C1, C135, C136 |
| 3 | CL05B104KO5NNNC 100 nF | C_0402_1005Metric | C3, C5, C16 |
| 1 | CL05C101JB5NNNC 100 pF | C_0402_1005Metric | C6 |
| 1 | CC0402KRX7R9BB222 2.2 nF | C_0402_1005Metric | C7 |
| 2 | RC0402FR-0710KL 10 k | R_0402_1005Metric | R1, R3 |
| 4 | RC0402FR-071KL 1 k | R_0402_1005Metric | R2, R7, R8, R9 |
SAM-M10Q GNSS carrier, LDO supply design files
The KiCad project lives in the Tinkerbug-Robotics/TinkerRocket repository on GitHub; these links point at the commit this page was built from.
SAM-M10Q GNSS carrier, LDO supply: common questions
How big is the SAM-M10Q GNSS carrier, LDO supply PCB?
The SAM-M10Q GNSS carrier, LDO supply measures 22 × 27.5 mm, has 6 copper layers and is 1.5994 mm thick.
How many components are on the SAM-M10Q GNSS carrier, LDO supply?
22 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SAM-M10Q GNSS carrier, LDO supply design files?
From the Tinkerbug-Robotics/TinkerRocket repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SAM-M10Q GNSS carrier, LDO supply design in my own project?
Yes, under the terms of its GPL-3.0 license, which Tinkerbug-Robotics chose for the repository.
More boards in TinkerRocket
ESP32Tinker mantis
22.4 × 75 mm264 parts8LGPL-3.00
ESP32Tinker beetle
22.5 × 69.6 mm221 parts8LGPL-3.00
ESP32Base station
30.3 × 90.5 mm109 parts4LGPL-3.00
ESP32Tinker base
30.3 × 90.5 mm76 parts4LGPL-3.00
ESP32Lora daughterboard
22 × 27.5 mm66 parts6LGPL-3.00
Gnss px1105r-18mm highpower ext ant
22 × 27.5 mm28 parts4LGPL-3.00
Servo adapter
24.4 × 16.4 mm14 parts4LGPL-3.00
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372