Telemetry in midair
tmpk13·telemetry-in-midair·gps-radio-board/gps-radio-board.kicad_pcb
About the Telemetry in midair PCB
Telemetry in midair is an open source ESP32 PCB design by tmpk13, published on GitHub under the MIT license. It is a 4-layer board measuring 25 × 54 mm, with 59 components from 29 distinct parts.
Its main chip is the ESP32-C6-MINI-1U-H4, from the ESP32 family. Other key parts include the SiP32431DR3, AP2112K-3.3, MAX-M10N and MCP73831. By type, the board carries 19 capacitors, 18 resistors, 8 connectors, 7 ICs, 6 diodes and 1 inductor.
It belongs with the rf & radio designs in this gallery.
Main components on the Telemetry in midair
Telemetry in midair bill of materials (BOM)
59 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-MINI-1U-H4 | XCVR_ESP32-C6-MINI-1U-H4 | U1 |
| 1 | ~ | LoRa-E5 | U2 |
| 1 | SiP32431DR3 | SOT-363_SC-70-6 | U3 |
| 2 | AP2112K-3.3 | SOT23-5 | U4, U7 |
| 1 | MAX-M10N | ublox_MAX | U5 |
| 1 | MCP73831 | SOT-23-5_HandSoldering | U6 |
| 2 | SMA | SMA_Amphenol_132289_EdgeMount | J1, J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | JST_BATT | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J4 |
| 2 | Conn_01x04 | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5, J6 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | DM3CS-SF | microSD_HC_Hirose_DM3D-SF | J8 |
| 4 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D5, D6 |
| 2 | 40V@1A | D_SOD-123 | D3, D4 |
| 1 | 27n | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 7 | 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C5, C6, C18, C20, C21 |
| 2 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C15 |
| 5 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C13, C14, C19 |
| 1 | 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 2 | 15p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 1 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17 |
| 1 | 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 4 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R5, R10, R11 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 6 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R16, R17, R18, R19 |
| 2 | 22 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R14 |
| 1 | 10 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
Telemetry in midair design files
The KiCad project lives in the tmpk13/telemetry-in-midair repository on GitHub; these links point at the commit this page was built from.
Telemetry in midair: common questions
What microcontroller does the Telemetry in midair use?
The Telemetry in midair is built around the ESP32-C6-MINI-1U-H4, from the ESP32 family.
How big is the Telemetry in midair PCB?
The Telemetry in midair measures 25 × 54 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Telemetry in midair?
59 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Telemetry in midair design files?
From the tmpk13/telemetry-in-midair repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Telemetry in midair design in my own project?
Yes, under the terms of its MIT license, which tmpk13 chose for the repository.
Can I test firmware for the Telemetry in midair without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k