8 open source boards using the ESP32-C6-MINI-1U-H4
Real designs built with the ESP32-C6-MINI-1U-H4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Storm tracker hardware
solderable
36.5 × 69 mm79 parts4LNo license56ESP32
WellD
kinggh0stee
100 × 55 mm99 parts2LMIT2ESP32
Ptz driver
Aottens
100 × 80 mm251 parts4LNo license0ESP32
Power supply v1
pestvillian
188.6 × 145.2 mm90 parts2LNo license0RP2040/RP2350
Noctra-Devboard
lekangji
21 × 51 mm67 parts4LNo license0ESP32
Telemetry in midair
tmpk13
25 × 54 mm59 parts4LMIT0ESP32
Rev a input
Aottens
100 × 80 mm251 parts4LNo license0ESP32
Motor Controller
pestvillian
89 × 74 mm88 parts2LNo license0
How designs wire the ESP32-C6-MINI-1U-H4
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-C6-MINI-1U-H4 connects to, and the resistors, capacitors and other passives placed on it.
- The IO8_22 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 2.2 kΩ).
- The 3V3_3 pin is tied to 3.3V on 5 of 5 designs.
- The NC_4 pin is left unconnected on 5 of 5 designs.
- The EN_8 pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 2, 11, 14, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 | Connected to: GND 98% | — |
| 3V3_3pin 3 | Connected to: 3.3V 100% | — |
| NC_4pin 4 | Connected to: Not connected 100% | — |
| IO2_5pin 5 | Connected to: Signal 80% · not connected 20% |
|
| NCpin 7, 21, 32, 33, 34, 35 | Connected to: Not connected 100% | — |
| EN_8pin 8 | Connected to: Signal 100% |
|
| IO0_12pin 12 | Connected to: Not connected 60% · a signal 40% |
|
| IO1_13pin 13 | Connected to: Not connected 60% · a signal 40% |
|
| IO14_19pin 19 | Connected to: Not connected 60% · a signal 40% |
|
| IO15_20pin 20 | Connected to: Signal 60% · not connected 40% |
|
| IO8_22pin 22 | Connected to: Signal 100% |
|
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Storm tracker hardware by solderable, Ptz driver by Aottens, Noctra-Devboard by lekangji and Motor Controller by pestvillian.
The ESP32-C6-MINI-1U-H4 in open source designs
The gallery holds 8 open source boards using the ESP32-C6-MINI-1U-H4 from 6 GitHub repositories; a typical one measures about 94.5 × 71.5 mm and carries around 89 components.
63% use four copper layers or more, and 25% carry an open source license.
The most starred is Storm tracker hardware by solderable.
Parts used alongside the ESP32-C6-MINI-1U-H4
Microcontrollers on boards using the ESP32-C6-MINI-1U-H4
What boards using the ESP32-C6-MINI-1U-H4 are built for
ESP32-C6-MINI-1U-H4: common questions
Where can I find a ESP32-C6-MINI-1U-H4 reference design?
Each of the 8 boards on this page is a real design using the ESP32-C6-MINI-1U-H4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-C6-MINI-1U-H4 IO8_22 pin?
The IO8_22 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the ESP32-C6-MINI-1U-H4.
How is the ESP32-C6-MINI-1U-H4 3V3_3 pin connected?
The 3V3_3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C6-MINI-1U-H4.
How is the ESP32-C6-MINI-1U-H4 NC_4 pin connected?
The NC_4 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C6-MINI-1U-H4.
Which microcontrollers do boards using the ESP32-C6-MINI-1U-H4 use?
Most are built on ESP32 (7) and RP2040/RP2350 (1).
How big is a typical board using the ESP32-C6-MINI-1U-H4?
The median is 94.5 × 71.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the ESP32-C6-MINI-1U-H4?
By GitHub stars, Storm tracker hardware by solderable, with 56 stars.
Can I simulate one of these boards using the ESP32-C6-MINI-1U-H4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.