Skibidi album clicker

tobycmΒ·skibidi-album-clickerΒ·pcb/skibidi-album-clicker.kicad_pcb

Skibidi album clicker PCB layout, top view β€” open source RP2040/RP2350 board by tobycm

About the Skibidi album clicker PCB

Skibidi album clicker is an open source RP2040/RP2350 PCB design by tobycm, published on GitHub under the MIT license. It is a 2-layer board measuring 30 Γ— 70 mm, with 23 components from 13 distinct parts.

Its main chip is the RP2040-ZERO, from the RP2040/RP2350 family. Other key parts include the PY25Q128HA-SUH-IR, TP4057 and ME6211C33M5. By type, the board carries 8 resistors, 6 capacitors, 4 ICs, 2 switches, 1 connector and 1 diode.

It belongs with the displays & leds designs in this gallery.

From the project

alllllll iiiiii wanttttt forr christmassssssssssss, is a tiny 3d printed with some pcb to display photos of the year πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘

alllllll iiiiii wanttttt forr christmassssssssssss, is a tiny 3d printed with some pcb to display photos of the year πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘πŸ€‘

this is a perfect gift for your loved ones. featuring a seeed xiao rp2040 with 2mb of flash, a 1.3 inch oled display, you can make them take a trip down memory lane with photos, or torture them idk.

Skibidi album clicker, from the project README
From the project README

Main components on the Skibidi album clicker

Skibidi album clicker bill of materials (BOM)

23 components, 13 distinct parts β€” part numbers from the project's BOM.

QtyPartRefs
1
PY25Q128HA-SUH-IR
U1
1
RP2040-ZERO
U2
1
TP4057
U3
1
ME6211C33M5
U4
1
CONN_01X02_SOCKET
Conn_01x02_Socket
J1
1
SPI LCD
DS1
1
C143801
RotaryEncoder_Switch_MP
SW1
1
K2-1102AQ-H4CW-01
ιŸ©ε›½ιŸ©θ£
SW2
1
LED
D1
5
10U
10u
C1, C5, C6, C7, C8
1
100n
C4
7
2.49K
2.49k
R1, R2, R3, R4, R5, R6, R8
1
1k
R7

Skibidi album clicker design files

The KiCad project lives in the tobycm/skibidi-album-clicker repository on GitHub; these links point at the commit this page was built from.

Skibidi album clicker: common questions

What microcontroller does the Skibidi album clicker use?

The Skibidi album clicker is built around the RP2040-ZERO, from the RP2040/RP2350 family.

How big is the Skibidi album clicker PCB?

The Skibidi album clicker measures 30 Γ— 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Skibidi album clicker?

23 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Skibidi album clicker design files?

From the tobycm/skibidi-album-clicker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Skibidi album clicker design in my own project?

Yes, under the terms of its MIT license, which tobycm chose for the repository.

Can I test firmware for the Skibidi album clicker without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards