10 open source boards using the FT232RNL

Real designs built with the FT232RNL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the FT232RNL

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the FT232RNL connects to, and the resistors, capacitors and other passives placed on it.

  • The RI pin is left unconnected on 4 of 5 designs.
  • The PE6 pin is left unconnected on 4 of 5 designs.
  • The PE7 pin is left unconnected on 4 of 5 designs.
  • The DCD pin is left unconnected on 4 of 5 designs.
DTRpin 2Connected to: Not connected 60% · a signal 40%
RTSpin 3Connected to: Not connected 60% · a signal 40%
VCCIOpin 4Connected to: Signal 80% · 3.3V 20%
  • Capacitor to GND on 60% · 100 nF (3), 10 µF (3), 22 µF (1)
RIpin 6Connected to: Not connected 80% · a signal 20%
GNDpin 7, 18, 21Connected to: GND 84% · a signal 16%
PE6pin 8Connected to: Not connected 80% · a signal 20%
PE7pin 9Connected to: Not connected 80% · a signal 20%
DCDpin 10Connected to: Not connected 80% · a signal 20%
CTSpin 11Connected to: Not connected 60% · GND 20% · a signal 20%
CBUS4pin 12Connected to: Not connected 80% · a signal 20%
CBUS2pin 13Connected to: Not connected 80% · a signal 20%
CBUS3pin 14Connected to: Not connected 80% · a signal 20%
3V3OUTpin 17Connected to: Signal 60% · 3.3V 40%
  • Capacitor to GND on 60% · 100 nF (3)
VCCpin 20Connected to: The microcontroller 50%, INA219BIDCNT 38%, LTC485CN8#PBF 38% · VBUS 25%
  • Capacitor to GND on 60% · 100 nF (11), 10 µF (2), 22 µF (1)
  • Series resistor on 40% · 10 kΩ (7)
  • Inductor on 40% · 10 µH (2)
CBUS1pin 22Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 270 Ω (1), 750 Ω (1)
CBUS0pin 23Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 1 kΩ (1), 270 Ω (1), 750 Ω (1)
PB5pin 24Connected to: Not connected 80% · a signal 20%
AGNDpin 25Connected to: GND 80% · a signal 20%
TESTpin 26Connected to: GND 80% · a signal 20%
OSCIpin 27Connected to: Not connected 80% · a signal 20%
OSCOpin 28Connected to: Not connected 80% · a signal 20%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LaunchController by tokai-student-rocket-project, YA usb ttl serial adapter by mastupristi, NX J401 Adapter by RealtimeRoboticsGroup and SeniorDesign SwanGanz by ATK-1.

The FT232RNL in open source designs

The gallery holds 10 open source boards using the FT232RNL from 5 GitHub repositories; a typical one measures about 135.5 × 99.6 mm and carries around 138 components.

80% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.

The most starred is SatelliteController2.0 by tokai-student-rocket-project.

Microcontrollers on boards using the FT232RNL

What boards using the FT232RNL are built for

FT232RNL: common questions

Where can I find a FT232RNL reference design?

Each of the 10 boards on this page is a real design using the FT232RNL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the FT232RNL RI pin connected?

The RI pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the FT232RNL.

How is the FT232RNL PE6 pin connected?

The PE6 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the FT232RNL.

How is the FT232RNL PE7 pin connected?

The PE7 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the FT232RNL.

Which microcontrollers do boards using the FT232RNL use?

Most are built on AVR/Arduino (6), ESP32 (1) and STM32 (1).

How big is a typical board using the FT232RNL?

The median is 135.5 × 99.6 mm, and 80% are two-layer designs.

What is the most popular open source board using the FT232RNL?

By GitHub stars, SatelliteController2.0 by tokai-student-rocket-project, with 2 stars.

Can I simulate one of these boards using the FT232RNL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part