Starbiew
Tomer-Sagie·Starbie·hardware/Starbiew.kicad_pcb
About the Starbiew PCB
Starbiew is an open source ESP32 PCB design by Tomer-Sagie, published on GitHub. It is a 2-layer board measuring 98 × 93.5 mm, with 23 components from 19 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 7 resistors, 4 capacitors, 3 connectors, 3 diodes, 2 ICs and 2 switches.
From the project
Its basicaly a tamagotchi that you can intertact with through haptics, sound, lights, and a screem as well as a motion sensor which is cool.
Its basicaly a tamagotchi that you can intertact with through haptics, sound, lights, and a screem as well as a motion sensor which is cool.
Not much else to say lol, check out my half life project page for the full timeline with timelapses and journal entries n stuff.

Main components on the Starbiew
Starbiew bill of materials (BOM)
23 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | MOTOR | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Passive Piezo 12mm | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 2 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2 |
| 1 | SS14 | D_SOD-123 | D3 |
| 3 | 100nF | C_0805_2012Metric | C1, C2, C4 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 10k | R_0805_2012Metric | R2 |
| 1 | 330Ω | R_0805_2012Metric | R3 |
| 1 | GL5528 | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R4 |
| 1 | 220 | R_0805_2012Metric | R5 |
| 1 | 100k | R_0805_2012Metric | R6 |
| 1 | 100 | R_0805_2012Metric | R7 |
Starbiew design files
The KiCad project lives in the Tomer-Sagie/Starbie repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/Starbiew.kicad_pcb
- Schematichardware/Starbiew.kicad_sch
Starbiew: common questions
What microcontroller does the Starbiew use?
The Starbiew is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Starbiew PCB?
The Starbiew measures 98 × 93.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Starbiew?
23 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Starbiew design files?
From the Tomer-Sagie/Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Starbiew design in my own project?
The repository has no license, so all rights stay with Tomer-Sagie. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Starbiew without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Starbie
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k