6 open source boards using the 100K
Real designs built with the 100K, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
POV-Display
Circuit-Digest
208 × 58 mm324 parts2LNo license34Kick-808
marangisto
19.3 × 106.5 mm70 parts2LMIT8ESP32
Esp32-drone flight controller
Prateek-elec
13.3 × 13.3 mm71 parts4LMIT0ESP32
Quad-PCB-For-Production
T-ABISHEK
45 × 45 mm67 parts2LNo license0ESP32
Thermal-Camera
Abhey-05
90 × 60 mm56 parts2LNo license0ESP32
ESP DRONE
TR-JAYAVARDHAN-SINGH
41.9 × 39.6 mm42 parts2LNo license0
How designs wire the 100K
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 100K connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to 5V on 5 of 6 designs.
- Pin 2 is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 5V 83% · a signal 17% | — |
| Pin 2 | Connected to: GND 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include POV-Display by Circuit-Digest, Kick-808 by marangisto, Thermal-Camera by Abhey-05 and Esp32-drone flight controller by Prateek-elec.
The 100K in open source designs
The gallery holds 6 open source boards using the 100K from 6 GitHub repositories; a typical one measures about 43.5 × 51.5 mm and carries around 69 components.
83% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is POV-Display by Circuit-Digest.
Parts used alongside the 100K
Microcontrollers on boards using the 100K
What boards using the 100K are built for
100K: common questions
Where can I find a 100K reference design?
Each of the 6 boards on this page is a real design using the 100K. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 100K pin 1 connected?
Pin 1 is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 100K.
How is the 100K pin 2 connected?
Pin 2 is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 100K.
What parts are used alongside the 100K?
The MIC5219-3.3YM5, ESP32-WROOM-32, AO3041, CH340K and DDC114TU-7-F appear in the most repositories here.
Which microcontrollers do boards using the 100K use?
Most are built on ESP32 (5).
How big is a typical board using the 100K?
The median is 43.5 × 51.5 mm, and 83% are two-layer designs.
What is the most popular open source board using the 100K?
By GitHub stars, POV-Display by Circuit-Digest, with 34 stars.
Can I simulate one of these boards using the 100K before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.