TrailCurrentTapper

trailcurrentoss·TrailCurrentTapper·EDA/trailcurrent-tapper.kicad_pcb

TrailCurrentTapper PCB layout, top view — open source ESP32 board by trailcurrentoss

About the TrailCurrentTapper PCB

TrailCurrentTapper is an open source ESP32 PCB design by trailcurrentoss, published on GitHub under the MIT license. It is a 2-layer board measuring 113.4 × 65.8 mm, with 46 components from 16 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AP63203WU-7 and SN65HVD230. By type, the board carries 16 resistors, 9 switches, 9 diodes, 6 capacitors, 3 ICs and 2 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains the EDA, CAD and firmware for an eight button control panel that works with the TrailCurrent PDM

Eight-button control panel that sends toggle commands over a CAN bus interface with OTA firmware update capability. Supports targeting Torrent (PWM lighting) or Switchback (relay) modules via build-time configuration. Part of the TrailCurrent open-source vehicle platform.

- Microcontroller: ESP32 (WROOM32) - Function: Physical button panel for CAN bus device control - Key Features: - 8 momentary buttons with LED backlights - Button press: toggle device on/off - Build-time target device selection (Torrent or Switchback, instance 0-2) - CAN bus communication at 500 kbps - Over-the-air (OTA)…

TrailCurrentTapper, from the project README
From the project README

Main components on the TrailCurrentTapper

TrailCurrentTapper bill of materials (BOM)

46 components, 16 distinct parts.

QtyPartRefs
1
AP63203WU-7
IC1
1
ESP32-WROOM-32
U1
1
SN65HVD230
U2
1
S4B-XH-SM4-TB
J1
1
S6B-XH-SM4-TB
J3
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
1
DS-04
SW9
9
LED
D1, D2, D3, D4, D5, D6, D7, D8 +1
1
NLV32T-3R9J-EF
L1
3
22uF
C1, C5, C6
1
0.1uF
C2
1
10uF
C3
1
100nF
C4
6
10k
R1, R4, R12, R14, R15, R16
9
340
R2, R3, R5, R6, R7, R8, R9, R10 +1
1
120
R13

TrailCurrentTapper design files

The KiCad project lives in the trailcurrentoss/TrailCurrentTapper repository on GitHub; these links point at the commit this page was built from.

TrailCurrentTapper: common questions

What microcontroller does the TrailCurrentTapper use?

The TrailCurrentTapper is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the TrailCurrentTapper PCB?

The TrailCurrentTapper measures 113.4 × 65.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TrailCurrentTapper?

46 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the TrailCurrentTapper design files?

From the trailcurrentoss/TrailCurrentTapper repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TrailCurrentTapper design in my own project?

Yes, under the terms of its MIT license, which trailcurrentoss chose for the repository.

Can I test firmware for the TrailCurrentTapper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards