11 open source boards using the TXU0304PWR
Real designs built with the TXU0304PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Black Body Temperature Sensor
DylanLockyer
62 × 77 mm206 parts6LMIT1ESP32
HX6-Miner
IsSasoriDev
170 × 115 mm258 parts6LGPL-3.00ESP32
Board fully integrated
lleck
370 × 370 mm234 parts4LNo license0FPGA
Zx50 MemoryCard RevC1
mmosko
132.1 × 108 mm172 parts6LNo license0Spi flash adapter v1
Spectating101
90 × 50 mm18 parts2LMIT0AVR/Arduino
Ts14-arduino shield
tropicsquare
58 × 53 mm13 parts2LNo license0AVR/Arduino
Ts14-arduino shield
tropicsquare
58 × 53 mm13 parts2LCERN-OHL-P-2.04ESP32
Main ctrl esp32 servo
Spectating101
80 × 50 mm11 parts2LMIT0ESP32
Main board new-3.2
lleck
369.4 × 107.4 mm82 parts4LNo license0ESP32
Main board-3.2
lleck
390 × 390 mm36 parts4LNo license0ESP32
Main board 4 jlc-3.2
lleck
369.4 × 107.4 mm36 parts4LNo license0
How designs wire the TXU0304PWR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TXU0304PWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF).
- The NC_6 pin is left unconnected on 5 of 6 designs.
- The NC_9 pin is left unconnected on 5 of 6 designs.
- The OE pin is tied to VCC_SPI_IO on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 100% |
|
| NC_6pin 6 | Connected to: Not connected 83% · GND 17% | — |
| GNDpin 7 | Connected to: GND 83% · a signal 17% | — |
| OEpin 8 | Connected to: VCC_SPI_IO 67% · a signal 33% | — |
| NC_9pin 9 | Connected to: Not connected 83% · a signal 17% | — |
| B4_INpin 10 | Connected to: A connector 50%, TROPIC01_CHIP 33% |
|
| VCCBpin 14 | Connected to: VCC 80% · a signal 20% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ts14-arduino shield by tropicsquare, Black Body Temperature Sensor PCB by DylanLockyer, HX6-Miner by IsSasoriDev and Board fully integrated by lleck.
The TXU0304PWR in open source designs
The gallery holds 11 open source boards using the TXU0304PWR from 7 GitHub repositories; a typical one measures about 132.1 × 107.4 mm and carries around 36 components.
64% use four copper layers or more, and 45% carry an open source license.
The most starred is Ts14-arduino shield by tropicsquare.
Parts used alongside the TXU0304PWR
Microcontrollers on boards using the TXU0304PWR
What boards using the TXU0304PWR are built for
TXU0304PWR: common questions
Where can I find a TXU0304PWR reference design?
Each of the 11 boards on this page is a real design using the TXU0304PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXU0304PWR VCCB pin?
The VCCB pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the TXU0304PWR.
How is the TXU0304PWR NC_6 pin connected?
The NC_6 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the TXU0304PWR.
How is the TXU0304PWR NC_9 pin connected?
The NC_9 pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the TXU0304PWR.
What parts are used alongside the TXU0304PWR?
The AMS1117-3.3, ESP32-S3-WROOM-1-N16R8 and TROPIC01_CHIP appear in the most repositories here.
Which microcontrollers do boards using the TXU0304PWR use?
Most are built on ESP32 (6), AVR/Arduino (2), FPGA (1) and STM32 (1).
How big is a typical board using the TXU0304PWR?
The median is 132.1 × 107.4 mm, and 36% are two-layer designs.
What is the most popular open source board using the TXU0304PWR?
By GitHub stars, Ts14-arduino shield by tropicsquare, with 4 stars.
Can I simulate one of these boards using the TXU0304PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.