Ee115-capstone
tsaimatthew·ee115-capstone
About the Ee115-capstone PCB
Ee115-capstone is an open source ESP32 PCB design by tsaimatthew, published on GitHub. It is a 2-layer board measuring 115.8 × 98.6 mm, with 187 components from 69 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the OPA2333AIDR, ADG701LBRJZ-REEL7, LM393DR, AP2112K-3.3 and MCP601T-E_OT. By type, the board carries 55 resistors, 51 capacitors, 34 test points, 21 ICs, 8 transistors and 5 connectors.
Main components on the Ee115-capstone
Ee115-capstone bill of materials (BOM)
187 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OPA2333AIDR | SOIC-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | ADG701LBRJZ-REEL7 | RJ_5_ADI | U2 |
| 1 | LM393DR | SOIC127P599X175-8N | U3 |
| 1 | ESP32-C3-WROOM-02-N4 | MODULE_ESP32-C3-WROOM-02-H4 | U5 |
| 1 | AP2112K-3.3 | SOT-23-5 | U6 |
| 1 | MCP601T-E_OT | SOT95P270X145-5N | U7 |
| 3 | MCP6571T-E/OT | SOP_MCP6571T-E&slash_OT_MCH | U8, U9, U21 |
| 2 | SN74LVC1G02DCKR (NOR) | DCK0005A_N | U10, U11 |
| 1 | ALD1107PBL | 14-PDIP_ALD | U12 |
| 1 | 74HC4052PW_118 | TSSOP16_5P1X4P5_NEX | U13 |
| 1 | SL78L05 | SOT-89-3 | U14 |
| 1 | 300P14-U | 300P14-U | U15 |
| 3 | OPA705PA | P8 | U16, U18, U19 |
| 1 | MIC4605-2YM MIC4605-2YM-TR | SOIC-8_M_MCH | U17 |
| 1 | AD8038 | KS_5_ADI | U20 |
| 1 | NCP565D2T33R4G | D2PAK3_ONS | U101 |
| 1 | PMOS | TO-220-3_Horizontal_TabDown | Q1 |
| 1 | NMOS | TO-92 | Q2 |
| 1 | NPN | TO-220-3_Vertical | Q3 |
| 2 | AO3400A | SOT-23 | Q4, Q5 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IRLZ44N | TO-220-3_Vertical | Q6 |
| 1 | PNP | TO-220F-3_Vertical | Q7 |
| 1 | NPN 40V | TO-220-3_Horizontal_TabDown | Q8 |
| 1 | 2171790001 | MOLEX_2171790001 | J1 |
| 1 | 9V_BATTERY | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J5 |
| 4 | R | res_0805_nosilk | Re1, Re2, Re3, Re4 |
| 3 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3 |
| 1 | GF-123-0054 | SW2_GF-123-0054_CWI | SW101 |
| 34 | TestPoint | TestPoint_Plated_Hole_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +26 |
| 2 | SS14 | D_SMA | D1, D101 |
| 2 | D_Schottky | D_SOD-523 | D3, D4 |
| 1 | SRN1060-101M | IND_BOURNS_SRN1060 | L1 |
| 1 | 0.1U 0.1u | R_1812_4532Metric | C1 |
| 1 | C | C_0805_2012Metric | C2 |
| 3 | C | 0805_cap_nosilk | C3, C101, C102 |
| 6 | 0.1U 0.1u | 0805_cap_nosilk | C4, C5, C6, C7, C8, C12 |
| 23 | C_Polarized | 0805_cap_nosilk | C9, C10, C14, C15, C17, C18, C19, C20 +15 |
| 1 | 1u | 0805_cap_nosilk | C11 |
| 1 | 10U 10u | 0805_cap_nosilk | C13 |
| 1 | 1u | C_0805_2012Metric | C16 |
| 1 | 100pF | 0805_cap_nosilk | C23 |
| 2 | 10uF | 0805_cap_nosilk | C24, C25 |
| 1 | 388nF | 0805_cap_nosilk | C29 |
| 1 | 440nF | 0805_cap_nosilk | C30 |
| 1 | 18.8uF | 0805_cap_nosilk | C36 |
| 7 | 1uF | 0805_cap_nosilk | C38, C40, C41, C42, C43, C44, C48 |
| 1 | 0.1uF | 0805_cap_nosilk | C39 |
| 3 | 180K 180k | res_0805_nosilk | R1, R15, R16 |
| 20 | R | res_0805_nosilk | R2, R3, R4, R5, R20, R26, R28, R29 +12 |
| 9 | 0 | res_0805_nosilk | R6, R7, R8, R13, R21, R40, R41, R42 +1 |
| 2 | 5.1K 5.1k | res_0805_nosilk | R9, R10 |
| 1 | 100K 100k | res_0805_nosilk | R11 |
| 1 | 1M | res_0805_nosilk | R12 |
| 4 | 10K 10k | res_0805_nosilk | R17, R18, R19, R24 |
| 4 | 10k | res_0805_nosilk | R22, R23, R25, R39 |
| 1 | 7.5k | res_0805_nosilk | R27 |
| 1 | 1.8k | res_0805_nosilk | R34 |
| 1 | 62 | res_0805_nosilk | R35 |
| 1 | 18.7K | res_0805_nosilk | R36 |
| 1 | 100 | res_0805_nosilk | R37 |
| 1 | Load | res_0805_nosilk | R38 |
| 1 | 430 | res_0805_nosilk | R45 |
| 1 | 143.6 | res_0805_nosilk | R50 |
| 1 | 3300 | res_0805_nosilk | R51 |
| 1 | 10 | res_0805_nosilk | R67 |
| 1 | 0 | R_0805_2012Metric | R102 |
Ee115-capstone design files
The KiCad project lives in the tsaimatthew/ee115-capstone repository on GitHub; these links point at the commit this page was built from.
- Layoutee115-capstone.kicad_pcb
- Schematicee115-capstone.kicad_sch
- BOMbom.csv
Ee115-capstone: common questions
What microcontroller does the Ee115-capstone use?
The Ee115-capstone is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Ee115-capstone PCB?
The Ee115-capstone measures 115.8 × 98.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ee115-capstone?
187 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ee115-capstone design files?
From the tsaimatthew/ee115-capstone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ee115-capstone design in my own project?
The repository has no license, so all rights stay with tsaimatthew. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ee115-capstone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k