FPGABoard
TTF-fog·FPGABoard·hardware/design_files/FPGABoard.kicad_pcb
About the FPGABoard PCB
FPGABoard is an open source ESP32 PCB design by TTF-fog, published on GitHub. It is a 4-layer board measuring 36.7 × 56.3 mm, with 52 components from 27 distinct parts.
Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the ICE40UP5K-SG48ITR, USBLC6-2P6, BQ21040DBV, TJ-S1608SW6TDSLCCYRGB-A5 and RT8075ZQW. By type, the board carries 18 capacitors, 17 resistors, 6 ICs, 3 connectors, 3 switches and 3 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Allows for wireless functionality (maybe even programming?) using the ESP32S3-M and IO using the iCE
Allows for wireless functionality (maybe even programming?) using the ESP32S3-M and IO using the iCE
note: if the images don't load, you can see them at images

Main components on the FPGABoard
FPGABoard bill of materials (BOM)
52 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ICE40UP5K-SG48ITR | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | ESP32-S3-MINI-1 | ESP32-S2-MINI-1 | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | BQ21040DBV | SOT-23-6 | U4 |
| 1 | TJ-S1608SW6TDSLCCYRGB-A5 TOGIALED(统佳) | LED-ARRAY-SMD_4P-L1.6-W0.8-BL-FD | U5 |
| 1 | RT8075ZQW | WDFN-10_L3.0-W3.0-P0.50-BL-EP | U6 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X20_PIN Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 3 | SW_Push | SW_Push_1P1T_NO_CK_KMR2 | SW1, SW2, SW3 |
| 2 | LED | LED_0402_1005Metric | D1, D3 |
| 1 | SK6812MINI-E | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D2 |
| 2 | AOTA-B201610S3R3-101-T | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2, L3 |
| 6 | 4.7UF 4.7uF | C_0402_1005Metric | C1, C4, C5, C8, C10, C15 |
| 6 | 100NF 100nF | C_0402_1005Metric | C2, C3, C6, C7, C9, C16 |
| 1 | 10UF 10uF | C_0402_1005Metric | C11 |
| 1 | 1UF 1uF | C_0402_1005Metric | C13 |
| 2 | 100N 100n | C_0402_1005Metric | C19, C21 |
| 2 | 22U 22u | C_0402_1005Metric | C20, C22 |
| 4 | 10K | R_0402_1005Metric | R1, R2, R3, R17 |
| 2 | 5.1K | R_0402_1005Metric | R4, R5 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 33 | R_0402_1005Metric | R6, R7 |
| 3 | 1K | R_0402_1005Metric | R8, R15, R16 |
| 1 | 20 | R_0402_1005Metric | R9 |
| 1 | 100 | R_0402_1005Metric | R10 |
| 2 | 51K 51k | R_0402_1005Metric | R11, R12 |
| 1 | 100K 100k | R_0402_1005Metric | R13 |
| 1 | 22K 22k | R_0402_1005Metric | R14 |
FPGABoard design files
The KiCad project lives in the TTF-fog/FPGABoard repository on GitHub; these links point at the commit this page was built from.
FPGABoard: common questions
What microcontroller does the FPGABoard use?
The FPGABoard is built around the ESP32-S3-MINI-1, from the ESP32 family.
How big is the FPGABoard PCB?
The FPGABoard measures 36.7 × 56.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the FPGABoard?
52 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FPGABoard design files?
From the TTF-fog/FPGABoard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FPGABoard design in my own project?
The repository has no license, so all rights stay with TTF-fog. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the FPGABoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k