Masthead Controller
Tuskar-Marine·hardware·projects/masthead-controller/pcb/Masthead Controller.kicad_pcb
About the Masthead Controller PCB
Masthead Controller is an open source ESP32 PCB design by Tuskar-Marine, published on GitHub. It is a 4-layer board measuring 150 × 83 mm, with 209 components from 75 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. By type, the board carries 68 resistors, 62 capacitors, 15 diodes, 14 inductors, 4 transistors and 2 switches.
From the project
All tools for the Mermaid's Rest open sailing tools
All tools for the Mermaid's Rest open sailing tools
Note: Patches and PRs are welcome, but at this stage of the project, I need to be able to understand / fix the code. Good comments and references to reading material will be grately appreciated! ^_^
If/when the project gets outside interest, I'll step out of the way of the much more talented folks.
Main components on the Masthead Controller
Masthead Controller bill of materials (BOM)
209 components, 75 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32-S3-WROOM-1 | MCU1 |
| 2 | 2N7002 | SOT-23 | Q1, Q2 |
| 2 | BSS138P,215 | Nexperia BSS138P,215 | Q3, Q4 |
| 1 | ADS1115BQDGSRQ1 | TI ADS1115BQDGSRQ1 | ADC1 |
| 1 | TCAN3404DRQ1 | TI TCAN3404 | CAN1 |
| 1 | ACT12101012PTL00 | TDK ACT12101012PTL00 | CMC1 |
| 3 | MCP4728T | MT MCP4728T-E_UN | DAC1, DAC2, DAC3 |
| 2 | TPS26631PWP | TI_TPS26631PWP | EF1, EF2 |
| 1 | 0440001.WRA | Littelfuse 440001 | F1 |
| 2 | Conn_02x06_Odd_Even | Amphenol 20021111-00012T4LF | FST1, FST2 |
| 12 | AL8861QMP-13 | Diodes Inc AL8861QMP-13 | LD1, LD2, LD3, LD4, LD5, LD6, LD7, LD8 +4 |
| 2 | DMTH6010SK3Q | Diodes Inc DMTH6010SK3Q | NFET1, NFET2 |
| 1 | RBT05W24S12 | XP Power RBT05W | PS1 |
| 2 | M24C64 | STM M24C64-RMN6P | ROM1, ROM2 |
| 2 | SW_MEC_5G | SW_TS03-66-50-BK-160-LCR-D-67 | SW1, SW2 |
| 1 | 1862440 | Phoenix Contact 1862440 | TB1 |
| 2 | 7799 | Keystone 7799 | TB2, TB3 |
| 6 | 1862437 | Phoenix Contact 1862437 | TB4, TB5, TB6, TB7, TB8, TB9 |
| 1 | Conn_02x06_Odd_Even | Amphenol 20021111-00012T4LF | TP1 |
| 1 | VCAN33A2-03SHE3A08 | Vishay VCAN33A2-03S | TVS1 |
Show 55 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD2E2U06QDBZRQ1 | TI TPD2E2U06 | TVS2 |
| 1 | SMCJ33A | Littelfuse SMCJ | TVS3 |
| 1 | USB4145-03-0170-C | GCT USB4145-03-0170-C | USBRV1 |
| 1 | TPSM33606S3QRDNRQ1 | TI TPSM336 | VR1 |
| 5 | NRVBA340NT3G | Onsemi NRVBA340NT3G | D1, D2, D4, D5, D15 |
| 1 | ZLLS500QTA | Diodes Inc ZLLS500 | D3 |
| 9 | LED_45DEG NRVBA340NT3G | Onsemi NRVBA340NT3G | D6, D7, D8, D9, D10, D11, D12, D13 +1 |
| 1 | 782853601 | Würth 782853601 | FB1 |
| 1 | 100 uH | Bourns SRN6045TA | L1 |
| 1 | 7847111100 100 uH | Bourns SRN6045TA | L2 |
| 4 | 220 uH | Bourns SRN6045TA | L3, L4, L9, L10 |
| 2 | 330 uH | Bourns SRN6045TA | L5, L6 |
| 2 | 470 uH | Bourns SRN6045TA | L7, L8 |
| 2 | 68 uH | Bourns SRN6045TA | L11, L12 |
| 1 | 22uH | Bourns SRN4018BTA | L13 |
| 4 | 0.1UF 10uF | TDK CGA5 | C1, C3, C4, C13 |
| 5 | 0.1UF 0.1uF | Kyocera AVX 0805 | C2, C20, C21, C23, C24 |
| 1 | 10UF 0.1uF | Kyocera AVX 0805 | C5 |
| 2 | 100pF | Kemet C0805X | C6, C7 |
| 2 | 10UF 22uF | Murata GCJ32ER71C | C8, C9 |
| 1 | 0.1UF 22uF | Murata GCJ32ER71C | C10 |
| 2 | 0.1UF 1uF | Kyocera AVX 0805 | C11, C12 |
| 1 | 4.7UF 0.1uF | Kyocera AVX 0805 | C14 |
| 1 | 0.1UF 1000pF | Kyocera AVX 0805 | C15 |
| 1 | 100UF 100pF | Kemet C0805X | C16 |
| 2 | 100UF 1uF | Kyocera AVX 0805 | C17, C18 |
| 1 | 1UF 0.1uF | Kyocera AVX 0805 | C19 |
| 1 | 0.1UF 0.01uF | Kyocera AVX 0805 | C22 |
| 9 | 0.1uF | Kyocera AVX 0805 | C25, C27, C28, C29, C30, C31, C32, C33 +1 |
| 1 | 0.047uF | Murata GCJ 0805 | C26 |
| 16 | 10uF | TDK CGA5 | C34, C35, C36, C37, C39, C41, C43, C45 +8 |
| 12 | 1000pF | Kyocera AVX 0805 | C40, C42, C44, C46, C48, C50, C52, C54 +4 |
| 2 | 4.7K 10kR | Stackpole RNCP0805 | R1, R5 |
| 1 | 4.7K 60R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 100K 0R | Vishay RCA-SR e3 | R4 |
| 1 | 3.3K 10kR | Stackpole RNCP0805 | R6 |
| 1 | 10K 10kR | Stackpole RNCP0805 | R7 |
| 1 | 147 10kR | Stackpole RNCP0805 | R8 |
| 15 | 10kR | Stackpole RNCP0805 | R9, R12, R32, R35, R38, R45, R46, R49 +7 |
| 1 | 10K 4.7kR | Stackpole RMCA0805 | R10 |
| 1 | 63.4 4.7kR | Stackpole RMCA0805 | R11 |
| 1 | 10K 15kR | Stackpole RMCA0805 | R13 |
| 1 | 63.4 5.11kR | Stackpole RNCP0805 | R14 |
| 1 | 5.11kR | Stackpole RNCP0805 | R15 |
| 5 | 10K 475R | Stackpole RNCP0805 | R16, R17, R18, R19, R20 |
| 7 | 475R | Stackpole RNCP0805 | R21, R22, R23, R24, R25, R26, R27 |
| 3 | 100kR | Stackpole RMCA0805 | R28, R39, R53 |
| 3 | 3.92kR | Stackpole RNCP0805 | R29, R36, R40 |
| 4 | 300kR | Yageo AE0805 | R30, R33, R41, R43 |
| 5 | 22.1kR | Stackpole RNCP0805 | R31, R34, R37, R42, R44 |
| 1 | 28kR | Stackpole RNCP0805 | R47 |
| 1 | 60.4kR | Vishay RCA-SR e3 | R48 |
| 8 | 0.15R | Vishay RCWE0805 | R60, R61, R62, R63, R68, R69, R70, R71 |
| 2 | 0.680R | Vishay RCWE0805 | R64, R65 |
| 2 | 1.200R | Panasonic ERJ-UP6 0805 | R66, R67 |
Masthead Controller design files
The KiCad project lives in the Tuskar-Marine/hardware repository on GitHub; these links point at the commit this page was built from.
Masthead Controller: common questions
What microcontroller does the Masthead Controller use?
The Masthead Controller is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the Masthead Controller PCB?
The Masthead Controller measures 150 × 83 mm, has 4 copper layers and is 1.659981 mm thick.
How many components are on the Masthead Controller?
209 components, from 75 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Masthead Controller design files?
From the Tuskar-Marine/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Masthead Controller design in my own project?
The repository has no license, so all rights stay with Tuskar-Marine. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Masthead Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hardware
STM32
Muirgen Main Control Unit
Tuskar-Marine
280 × 200 mm381 parts4LNo license6STM32
2-Ring Compass Rose
Tuskar-Marine
170 × 180 mm238 parts4LNo license6STM32
Battery Display
Tuskar-Marine
110 × 175.3 mm187 parts4LNo license6STM32
Relay Module
Tuskar-Marine
320 × 80 mm134 parts4LNo license6USB-C PD 2x 100W
Tuskar-Marine
96 × 136 mm116 parts4LNo license6ESP32
N2K Transceiver
Tuskar-Marine
60 × 75 mm68 parts4LNo license6
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k