N2K Transceiver
Tuskar-Marine·hardware·projects/n2k-transceiver/N2K Transceiver.kicad_pcb
About the N2K Transceiver PCB
N2K Transceiver is an open source ESP32 PCB design by Tuskar-Marine, published on GitHub. It is a 4-layer board measuring 60 × 75 mm, with 68 components from 41 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. By type, the board carries 27 resistors, 16 capacitors, 7 LEDs, 3 switches, 1 IC and 1 connector.
It belongs with the rf & radio designs in this gallery.
From the project
All tools for the Mermaid's Rest open sailing tools
All tools for the Mermaid's Rest open sailing tools
Note: Patches and PRs are welcome, but at this stage of the project, I need to be able to understand / fix the code. Good comments and references to reading material will be grately appreciated! ^_^
If/when the project gets outside interest, I'll step out of the way of the much more talented folks.
Main components on the N2K Transceiver
N2K Transceiver bill of materials (BOM)
68 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32-S3-WROOM-1 | MCU1 |
| 1 | JTAG | PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | TCAN3404DRQ1 | TI TCAN3404 | CAN1 |
| 1 | ACT12101012PTL00 | TDK ACT12101012PTL00 | CMC1 |
| 1 | nanoASMDCH020F | Littelfuse NANOASMDCH020F | PTC1 |
| 2 | M24C64 | STM M24C64-RMN6P | ROM1, ROM2 |
| 1 | VS-30MQ040HM3/5AT | Vishay 30MQ040 | SD1 |
| 2 | SW_MEC_5G | SW_TS03-66-50-BK-160-LCR-D-67 | SW1, SW2 |
| 1 | SW_MEC_5G | SW_TS03-66-50-BK-160-LCR-D-67 | SW3 |
| 1 | 1862440 | Phoenix Contact 1862440 | TB1 |
| 1 | Comms TP | PinHeader_1x10_P2.54mm_Vertical | TP1 |
| 1 | SMBJ20A-Q | Bourns SMBJ20 | TVS1 |
| 1 | VCAN33A2-03SHE3A08 | Vishay VCAN33A2-03S | TVS2 |
| 1 | TPD2E2U06QDBZRQ1 | TI TPD2E2U06 | TVS3 |
| 1 | USB4145-03-0170-C | GCT USB4145-03-0170-C | USBRV1 |
| 1 | TPSM33606S3QRDNRQ1 | TI TPSM336 | VR1 |
| 7 | LED | ams OSRAM LS Q976.01 | LED1, LED2, LED3, LED4, LED5, LED6, LED7 |
| 3 | 0.1UF 0.1uF | Kyocera AVX 0805 | C1, C4, C12 |
| 3 | 0.1UF 10uF | TDK CGA5 | C2, C3, C10 |
| 1 | 10UF 100pF | Kemet C0805X | C5 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100pF | Kemet C0805X | C6 |
| 1 | 22uF | Murata GCJ32ER71C | C7 |
| 1 | 10UF 22uF | Murata GCJ32ER71C | C8 |
| 1 | 10UF 1uF | Kyocera AVX 0805 | C9 |
| 1 | 0.1UF 1uF | Kyocera AVX 0805 | C11 |
| 1 | 0.1UF 1000pF | TDK CGA 0805 | C13 |
| 1 | 4.7UF 1uF | Kyocera AVX 0805 | C14 |
| 2 | 100UF 0.1uF | Kyocera AVX 0805 | C16, C17 |
| 2 | 4.7K 10kR | Stackpole_RNCP1206 | R1, R2 |
| 1 | 4.7K 0R | Vishay RCA-SR e3 | R3 |
| 1 | 4.7K 470kR | Wurth WRIS-RSKS | R5 |
| 1 | 3.3K 100kR | Stackpole RMCA0805 | R6 |
| 1 | 10K 0R | Vishay RCA-SR e3 | R7 |
| 1 | 147 10kR | Stackpole_RNCP1206 | R8 |
| 3 | 10kR | Stackpole_RNCP1206 | R9, R12, R24 |
| 6 | 10K 10kR | Stackpole_RNCP1206 | R10, R13, R17, R18, R19, R20 |
| 1 | 63.4 10kR | Stackpole_RNCP1206 | R11 |
| 1 | 63.4 15kR | Stackpole_RNCP1206 | R14 |
| 1 | 5.11kR | Stackpole_RNCP1206 | R15 |
| 1 | 10K 5.11kR | Stackpole_RNCP1206 | R16 |
| 7 | 681R | Stackpole RMCA0805 | R21, R22, R23, R25, R26, R27, R28 |
N2K Transceiver design files
The KiCad project lives in the Tuskar-Marine/hardware repository on GitHub; these links point at the commit this page was built from.
N2K Transceiver: common questions
What microcontroller does the N2K Transceiver use?
The N2K Transceiver is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the N2K Transceiver PCB?
The N2K Transceiver measures 60 × 75 mm, has 4 copper layers and is 1.659981 mm thick.
How many components are on the N2K Transceiver?
68 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the N2K Transceiver design files?
From the Tuskar-Marine/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the N2K Transceiver design in my own project?
The repository has no license, so all rights stay with Tuskar-Marine. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the N2K Transceiver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in hardware
STM32
Muirgen Main Control Unit
Tuskar-Marine
280 × 200 mm381 parts4LNo license6STM32
2-Ring Compass Rose
Tuskar-Marine
170 × 180 mm238 parts4LNo license6ESP32
Masthead Controller
Tuskar-Marine
150 × 83 mm209 parts4LNo license6STM32
Battery Display
Tuskar-Marine
110 × 175.3 mm187 parts4LNo license6STM32
Relay Module
Tuskar-Marine
320 × 80 mm134 parts4LNo license6USB-C PD 2x 100W
Tuskar-Marine
96 × 136 mm116 parts4LNo license6
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k