QuadruFred

TyRy-Robotics·QuadruFred-PCB

QuadruFred PCB layout, top view — open source ESP32 board by TyRy-Robotics

About the QuadruFred PCB

QuadruFred is an open source ESP32 PCB design by TyRy-Robotics, published on GitHub under the MIT license. It is a 4-layer board measuring 71.6 × 60 mm, with 18 components from 17 distinct parts.

Its main chip is the ESP32-S3-MINI-1, from the ESP32 family. Other key parts include the PCA9685PW and TPD4EUSB30. By type, the board carries 13 connectors, 3 ICs and 2 resistors.

It belongs with the sensors and robotics & motion designs in this gallery.

From the project

A personal project Quadruped AKA QuadruFred. I have been working on for a while. I have decided to make a gen 2 and upgrade it in every way such as using custom PCB, using accelerometer for stabilization and overall a many mechanical changes to make it an overall smoother quadruped.

Main components on the QuadruFred

QuadruFred bill of materials (BOM)

18 components, 17 distinct parts.

QtyPartRefs
1
PCA9685PW
U1
1
ESP32-S3-MINI-1
U2
1
TPD4EUSB30
U3
1
Servo1
J1
1
Servo2
J2
1
Servo3
J3
1
Servo4
J4
1
Servo5
J5
1
Servo6
J6
1
Servo7
J7
1
Servo8
J8
1
Servo9
J9
1
Servo10
J10
1
Servo11
J11
1
Servo12
J12
1
USB_C_Receptacle_USB2.0_16P
J13
2
5.1 kΩ
R1, R2

QuadruFred design files

The KiCad project lives in the TyRy-Robotics/QuadruFred-PCB repository on GitHub; these links point at the commit this page was built from.

QuadruFred: common questions

What microcontroller does the QuadruFred use?

The QuadruFred is built around the ESP32-S3-MINI-1, from the ESP32 family.

How big is the QuadruFred PCB?

The QuadruFred measures 71.6 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the QuadruFred?

18 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the QuadruFred design files?

From the TyRy-Robotics/QuadruFred-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the QuadruFred design in my own project?

Yes, under the terms of its MIT license, which TyRy-Robotics chose for the repository.

Can I test firmware for the QuadruFred without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards