56 open source boards using the TPD4EUSB30

Real designs built with the TPD4EUSB30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

56 boardsClear filters|Most starred

How designs wire the TPD4EUSB30

Read from the KiCad layouts of 40 open source designs, one per repository: what each pin of the TPD4EUSB30 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 3, 8Connected to: GND 93%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wall Panel by dotstartech, CM5 MINIMA by claynicholson, Rpi cm5io mini itx by sanctuary-systems-com and Libreboard by 256foundation.

The TPD4EUSB30 in open source designs

The gallery holds 56 open source boards using the TPD4EUSB30 from 43 GitHub repositories; a typical one measures about 160 × 90 mm and carries around 127 components.

82% use four copper layers or more, and 46% carry an open source license.

The most starred is Wall Panel by dotstartech.

Microcontrollers on boards using the TPD4EUSB30

TPD4EUSB30: common questions

Where can I find a TPD4EUSB30 reference design?

Each of the 56 boards on this page is a real design using the TPD4EUSB30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPD4EUSB30?

The AP22653W6, MagJack-A70-112-331N126, RT9742SNGV, RT9742GGJ5 and 74LVC1G07SE-7 appear in the most repositories here.

Which microcontrollers do boards using the TPD4EUSB30 use?

Most are built on Raspberry Pi (40), ESP32 (4), AVR/Arduino (3) and STM32 (3).

How big is a typical board using the TPD4EUSB30?

The median is 160 × 90 mm, and 18% are two-layer designs.

What is the most popular open source board using the TPD4EUSB30?

By GitHub stars, Wall Panel by dotstartech, with 366 stars.

Can I simulate one of these boards using the TPD4EUSB30 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part